한국표준정보망

회원가입 로그인 비회원(주문조회) 장바구니 이용안내

English
메뉴
검색 마이페이지 장바구니0

QUICK

닫기

TOP

해외표준 상세정보

관심표준 등록 : 표준업데이트 시 알림서비스

제공형태 더보기

  • KS

    구판

    판매

    ASTM B381-06a

    Standard Specification for Titanium and Titanium Alloy Forgings
    • 발행일 : 2006-04-01
    • 발행기관 : ASTM
    즐겨찾기 장바구니 담기
    닫기

    상품이 장바구니에 담겼습니다.

    장바구니로 이동

    • [영어]PDF 128,600원

    • [영어]PRINT 128,600원

상세정보

분야 02.04 : 비철금속-니켈, 납, 주석, 귀금속, 일차금속 등
적용범위

1.1 This specification covers 39 grades of annealed titanium and titanium alloy forgings as follows:

1.1.1 Grade F-1 Unalloyed titanium,

1.1.2 Grade F-2 Unalloyed titanium,

Grade F-2H

Unalloyed titanium (Grade 2 with 58 ksi minimum UTS),

1.1.3 Grade F-3 Unalloyed titanium,

1.1.4 Grade F-4 Unalloyed titanium,

1.1.5 Grade F-5 Titanium alloy (6 % aluminum, 4 % vanadium),

1.1.6 Grade F-6 Titanium alloy (5 % aluminum, 2.5 % tin),

1.1.7 Grade F-7 Unalloyed titanium plus 0.12 to 0.25 % palladium,

Grade F-7H

Unalloyed titanium plus 0.12 to 0.25 % palladium (Grade 7 with 58 ksi minimum UTS),

1.1.8 Grade F-9 Titanium alloy (3 % aluminum, 2.5 % vanadium),

1.1.9 Grade F-11 Unalloyed titanium plus 0.12 to 0.25 % palladium,

1.1.10 Grade F-12 Titanium alloy (0.3 % molybdenum, 0.8 % nickel),

1.1.11 Grade F-13 Titanium alloy (0.5 % nickel, 0.05 % ruthenium),

1.1.12 Grade F-14 Titanium alloy (0.5 % nickel, 0.05 % ruthenium),

1.1.13 Grade F-15 Titanium alloy (0.5 % nickel, 0.05 % ruthenium),

1.1.14 Grade F-16 Unalloyed titanium plus 0.04 to 0.08 % palladium,

Grade F-16H

Unalloyed titanium plus 0.04 to 0.08 % palladium (Grade 16 with 58 ksi minimum UTS),

1.1.15 Grade F-17 Unalloyed titanium plus 0.04 to 0.08 % palladium,

1.1.16 Grade F-18 Titanium alloy (3 % aluminum, 2.5 % vanadium) plus 0.04 % to 0.08 % palladium,

1.1.17 Grade F-19 Titanium alloy (3 % aluminum, 8 % vanadium, 6 % chromium, 4 % zirconium, 4 % molybdenum),

1.1.18 Grade F-20 Titanium alloy (3 % aluminum, 8 % vanadium, 6 % chromium, 4 % zirconium, 4 % molybdenum) plus 0.04 to 0.08 % palladium,

1.1.19 Grade F-21 Titanium alloy (3 % aluminum, 2.7 % niobium, 15 % molybdenum, 0.25 % silicon),

1.1.20 Grade F-23 Titanium alloy (6 % aluminum, 4 % vanadium, extra low interstitials, ELI),

1.1.21 Grade F-24 Titanium alloy (6 % aluminum, 4 % vanadium) plus 0.04 to 0.08 % palladium,

1.1.22 Grade F-25 Titanium alloy (6 % aluminum, 4 % vanadium) plus 0.3 to 0.8 % nickel and 0.04 to 0.08 % palladium,

1.1.23 Grade F-26 Unalloyed titanium plus 0.08 to 0.14 % ruthenium,

Grade F-26H

Unalloyed titanium plus 0.08 to 0.14 % ruthenium (Grade 26 with 58 ksi minimum UTS),

1.1.24 Grade F-27 Unalloyed titanium plus 0.08 to 0.14 % ruthenium,

1.1.25 Grade F-28 Titanium alloy (3 % aluminum, 2.5 % vanadium plus 0.08 to 0.14 % ruthenium),

1.1.26 Grade F-29 Titanium alloy (6 % aluminum, 4 % vanadium, extra low interstitial, ELI plus 0.08 to 0.14 % ruthenium),

1.1.27 Grade F-30Titanium alloy (0.3 % cobalt, 0.05 % palladium),

1.1.28 Grade F-31 Titanium alloy (0.3 % cobalt, 0.05 % palladium),

1.1.29 Grade F-32 Titanium alloy (5 % aluminum, 1 % vanadium, 1 % tin, 1 % zirconium, 0.8 % molybdenum),

1.1.30 Grade F-33 Titanium alloy (0.4 % nickel, 0.015 % palladium, 0.025 % ruthenium, 0.15 % chromium),

1.1.31 Grade F-34 Titanium alloy (0.4 % nickel, 0.015 % palladium, 0.025 % ruthenium, 0.15 % chromium),

1.1.32 Grade F-35 Titanium alloy (4.5 % aluminum, 2 % molybdenum, 1.6 % vanadium, 0.5 % iron, 0.3 % silicon),

1.1.33 Grade F-36 Titanium alloy (45 % niobium),

1.1.34 Grade F-37Titanium alloy (1.5 % aluminum), and

1.1.35 Grade F-38Titanium alloy (4 % aluminum, 2.5 % vanadium, 1.5 % iron).

Note 1

H grade material is identical to the corresponding numeric grade (that is, Grade 2H = Grade 2) except for the higher guaranteed minimum UTS, and may always be certified as meeting the requirements of its corresponding numeric grade. Grades 2H, 7H, 16H, and 26H are intended primarily for pressure vessel use.

The H grades were added in response to a user association request based on its study of over 5200 commercial Grade 2, 7, 16, and 26 test reports, where over 99 % met the 58 ksi minimum UTS.

1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
국제분류(ICS)코드
페이지수 7
Edition 06a

이력정보

No. 표준번호 표준명 발행일 상태
1 ASTM B381-21상세보기 Standard Specification for Titanium and Titanium Alloy Forgings 2021-11-01 표준
2 ASTM B381-21 REDLINE상세보기 Standard Specification for Titanium and Titanium Alloy Forgings 2021-11-01 표준
3 ASTM B381-13(2019)상세보기 Standard Specification for Titanium and Titanium Alloy Forgings 2019-07-01 구판
4 ASTM B381-13상세보기 Standard Specification for Titanium and Titanium Alloy Forgings 2013-07-01 구판
5 ASTM B381-13 REDLINE상세보기 Standard Specification for Titanium and Titanium Alloy Forgings 2013-07-01 구판
6 ASTM B381-10e1상세보기 Standard Specification for Titanium and Titanium Alloy Forgings 2010-05-01 구판
7 ASTM B381-10상세보기 Standard Specification for Titanium and Titanium Alloy Forgings 2010-05-01 구판
8 ASTM B381-09상세보기 Standard Specification for Titanium and Titanium Alloy Forgings 2009-05-01 구판
9 ASTM B381-08a상세보기 Standard Specification for Titanium and Titanium Alloy Forgings 2008-08-01 구판
10 ASTM B381-08상세보기 Standard Specification for Titanium and Titanium Alloy Forgings 2008-05-15 구판
11 ASTM B381-06상세보기 Standard Specification for Titanium and Titanium Alloy Forgings 2006-04-01 구판
12 ASTM B381-06a상세보기 Standard Specification for Titanium and Titanium Alloy Forgings 2006-04-01 구판
13 ASTM B381-05e1상세보기 Standard Specification for Titanium and Titanium Alloy Forgings 2005-01-01 구판
14 ASTM B381-05상세보기 Standard Specification for Titanium and Titanium Alloy Forgings 2005-01-01 구판
15 ASTM B381-03상세보기 Standard Specification for Titanium and Titanium Alloy Forgings 2003-11-01 구판
16 ASTM B381-02상세보기 Standard Specification for Titanium and Titanium Alloy Forgings 2002-10-10 구판
17 ASTM B381-00상세보기 Standard Specification for Titanium and Titanium Alloy Forgings 2000-05-10 구판

관련상품

  • 관련상품이 존재하지 않습니다.

다른 사람이 함께 구입한 상품

  • 함께 구입한 상품이 존재하지 않습니다.

추천 상품

제공형태 닫기

  • PDF :

    직접 파일 다운로드 및 인쇄(마이페이지 확인)

  • 보안PDF :

    직접 파일 다운로드 및 인쇄(마이페이지 확인)* 단, 파일이동 및 복사 불가, 1회 다운로드 및 인쇄가능

  • PRINT :

    인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)

  • BOOK :

    인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)

  • ZIP :

    압축파일형태로 제공 (PDF, HTML, TXT, XLS 등으로 구성), 직접 파일 다운로드(마이페이지 확인)

  • CD/DVD :

    직접 파일 다운로드 및 인쇄(마이페이지 확인)

  • DB :

    별도 정보 제공

  • HARDCOPY :

    해외 배송 상품, 최대 3주 소요

  • 바인더 :

    바인더 우편발송, 2~3일 소요

  • 온라인구독 :

    WEB 접속 후 실시간 열람, 출력(1년간)