QUICK

TOP

해외표준 상세정보

관심표준 등록 : 표준업데이트 시 알림서비스

제공형태 더보기
  • KS

    구판

    판매

    ASTM F897-02(2007)

    Standard Test Method for Measuring Fretting Corrosion of Osteosynthesis Plates and Screws
    • 발행일 : 2007-10-01
    • 발행기관 : ASTM
    즐겨찾기 장바구니 담기
    닫기

    상품이 장바구니에 담겼습니다.

    장바구니로 이동
    • [영어]PDF 131,600원

    • [영어]PRINT 131,600원

상세정보

분야 13.01 : 의료기, 외과용 도구 및 장비
적용범위

1.1 This test method provides a screening test for determining the amount of metal loss from plates and screws used for osteosynthesis (internal fixation of broken bones) due to fretting corrosion in the contact area between the screw head and the plate hole countersink area. The implants are used in the form they would be used clinically. The machine described generates a relative motion between plates and screws which simulates one type of motion pattern that can occur when these devices are used clinically.

1.2 Since the environmental and stress conditions used in this test method may not be identical to those experienced by bone plates in the human body, this test method may produce fretting corrosion rates that are lower or higher than those experienced in practice. The recommended axial load of 400 N was selected as being in a range where the amount of fretting corrosion is not sensitive to small changes in axial load (1). The combination of the recommended load and angular displacement are such that a measurable amount of fretting corrosion of surgical alloys occurs in a comparatively short period of time (7 to 14 days). (Refs 1-3)

1.3 The device is designed so as to facilitate sterilization of the test specimens and test chambers to permit testing with proteinaceous solutions that would become contaminated with microbial growth in nonsterile conditions.

1.4 The specimens used can be standard osteosynthesis implants or can be materials fabricated into the appropriate shapes.

1.5 This test method may be used for testing the fretting corrosion of metal plates and screws of similar or different alloy compositions, or it may be used for testing the fretting corrosion of metal-nonmetal combinations. This test method may also be used for wear or degradation studies of nonmetallic materials. This test method may be used as a screening test to rank the corrosivities of saline or proteinaceous solutions, or to rank metal-to-metal couples for resistance to fretting corrosion, or to study other material combinations.

1.6 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.

This standard may involve hazardous materials, operations, and equipment. This standard does not purport to address all of the safety concerns associated with its use. It is the responsibility of whoever uses this standard to consult and establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

국제분류(ICS)코드
페이지수 5
Edition 02(2007)

이력정보

No. 표준번호 표준명 발행일 상태
1 ASTM F897-19상세보기 Standard Test Method for Measuring Fretting Corrosion of Osteosynthesis Plates and Screws 2019-11-01 표준
2 ASTM F897-19 REDLINE상세보기 Standard Test Method for Measuring Fretting Corrosion of Osteosynthesis Plates and Screws 2019-11-01 표준
3 ASTM F897-02(2013)상세보기 Standard Test Method for Measuring Fretting Corrosion of Osteosynthesis Plates and Screws 2013-03-01 구판
4 ASTM F897-02(2007)상세보기 Standard Test Method for Measuring Fretting Corrosion of Osteosynthesis Plates and Screws 2007-10-01 구판
5 ASTM F897-02상세보기 Standard Test Method for Measuring Fretting Corrosion of Osteosynthesis Plates and Screws 2002-12-10 구판
6 ASTM F897-84(1997)상세보기 Standard Test Method for Measuring Fretting Corrosion of Osteosynthesis Plates and Screws 1999-05-21 구판
7 ASTM F897-84(1997)e1상세보기 Standard Test Method for Measuring Fretting Corrosion of Osteosynthesis Plates and Screws 1984-09-28 구판

제공형태 닫기

  • PDF :

    직접 파일 다운로드 및 인쇄(마이페이지 확인)
  • 보안PDF :

    직접 파일 다운로드 및 인쇄(마이페이지 확인)* 단, 파일이동 및 복사 불가, 1회 다운로드 및 인쇄가능
  • PRINT :

    인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
  • BOOK :

    인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
  • ZIP :

    압축파일형태로 제공 (PDF, HTML, TXT, XLS 등으로 구성), 직접 파일 다운로드(마이페이지 확인)
  • CD/DVD :

    직접 파일 다운로드 및 인쇄(마이페이지 확인)
  • DB :

    별도 정보 제공
  • HARDCOPY :

    해외 배송 상품, 최대 3주 소요
  • 바인더 :

    바인더 우편발송, 2~3일 소요
  • 온라인구독 :

    WEB 접속 후 실시간 열람, 출력(1년간)