QUICK

TOP

해외표준 상세정보

관심표준 등록 : 표준업데이트 시 알림서비스

제공형태 더보기

상세정보

분야 04.07 : 건축실 및 실링재; 소방재규정
적용범위

1.1 This guide describes the use of a cold liquid-applied sealant for joint sealing applications. Including joints on buildings and related adjacent areas, such as plazas, decks, and pavements for vehicular or pedestrian use, and types of construction other than highways and airfield pavements and bridges. Information in this guide is primarily applicable to a single and multi-component, cold liquid-applied joint sealant and secondarily to a precured sealant when used with a properly prepared joint opening and substrate surfaces.

1.2 An elastomeric or non-elastomeric sealant described by this guide should meet the requirements of Specification C834, C920, or C1311.

1.3 This guide does not provide information or guidelines for the use of a sealant in a structural sealant glazing application. Guide C1401 should be consulted for this information. Additionally, it also does not provide information or guidelines for the use of a sealant in an insulating glass unit edge seal used in a structural sealant glazing application. Guide C1249 should be consulted for this information.

1.4 Practice C919 should be consulted for information and guidelines for the use of a sealant in an application where an acoustic joint seal is required.

1.5 This guide also does not provide information relative to the numerous types of sealant that are available nor specific generic sealant properties, such as hardness, tack-free time, or curing process, among others.

1.6 The values stated in SI units are to be regarded as the standard. The values given in parenthesis are provided for information only.

1.7 The Committee with jurisdiction for this standard is not aware of any comparable standards published by other organizations.

1.8 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices, and determine the applicability of regulatory limitations prior to use.

1.9 The committee with jurisdiction over this standard is not aware of any comparable standards published by other organizations.

국제분류(ICS)코드 91.100.50 : 바인더. 밀봉재
페이지수 35
Edition 11a

이력정보

No. 표준번호 표준명 발행일 상태
1 ASTM C1193-25상세보기 Standard Guide for Use of Joint Sealants 2025-04-01 표준
2 ASTM C1193-16(2023)상세보기 Standard Guide for Use of Joint Sealants 2023-05-01 구판
3 ASTM C1193-16상세보기 Standard Guide for Use of Joint Sealants 2016-01-01 구판
4 ASTM C1193-13상세보기 Standard Guide for Use of Joint Sealants 2013-01-15 구판
5 ASTM C1193-12상세보기 Standard Guide for Use of Joint Sealants 2012-11-15 구판
6 ASTM C1193-11a상세보기 Standard Guide for Use of Joint Sealants 2011-10-01 구판
7 ASTM C1193-11상세보기 Standard Guide for Use of Joint Sealants 2011-06-15 구판
8 ASTM C1193-09상세보기 Standard Guide for Use of Joint Sealants 2009-01-01 구판
9 ASTM C1193-05a상세보기 Standard Guide for Use of Joint Sealants 2005-05-01 구판
10 ASTM C1193-05상세보기 Standard Guide for Use of Joint Sealants 2005-01-01 구판
11 ASTM C1193-00상세보기 Standard Guide for Use of Joint Sealants 2000-06-10 구판

제공형태 닫기

  • PDF :

    직접 파일 다운로드 및 인쇄(마이페이지 확인)
  • 보안PDF :

    직접 파일 다운로드 및 인쇄(마이페이지 확인)* 단, 파일이동 및 복사 불가, 1회 다운로드 및 인쇄가능
  • PRINT :

    인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
  • BOOK :

    인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
  • ZIP :

    압축파일형태로 제공 (PDF, HTML, TXT, XLS 등으로 구성), 직접 파일 다운로드(마이페이지 확인)
  • CD/DVD :

    직접 파일 다운로드 및 인쇄(마이페이지 확인)
  • DB :

    별도 정보 제공
  • HARDCOPY :

    해외 배송 상품, 최대 3주 소요
  • 바인더 :

    바인더 우편발송, 2~3일 소요
  • 온라인구독 :

    WEB 접속 후 실시간 열람, 출력(1년간)