한국표준정보망

회원가입 로그인 비회원(주문조회) 장바구니 이용안내

English
메뉴
검색 마이페이지 장바구니0

QUICK

닫기

TOP

해외표준 상세정보

관심표준 등록 : 표준업데이트 시 알림서비스

제공형태 더보기

  • KS

    구판

    판매

    ASTM B108/B108M-12

    Standard Specification for Aluminum-Alloy Permanent Mold Castings
    • 발행일 : 2012-05-01
    • 발행기관 : ASTM
    즐겨찾기 장바구니 담기
    닫기

    상품이 장바구니에 담겼습니다.

    장바구니로 이동

    • [영어]PDF 144,300원

    • [영어]PRINT 144,300원

상세정보

분야
적용범위

1.1 This specification covers aluminum-alloy permanent mold castings designated as shown in Table 1.

1.2 This specification is for aluminum-alloy permanent mold castings used in general purpose applications. It may not address the mechanical properties, integrity testing, and verification required for highly loaded or safety critical applications.

1.3 Alloy and temper designations are in accordance with ANSI H35.1/H35.1(M). The equivalent unified numbering system alloy designations are in accordance with Practice E527.

1.4 Unless the order specifies the “M” specification designation, the material shall be furnished to the inch-pound units.

1.5 For acceptance criteria for inclusion of new aluminum and aluminum alloys and their properties in this specification, see Annex A1 and Annex A2.

1.6 Units—The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.

1.7 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

TABLE 1 Chemical Composition LimitsA,B,C

Alloy Composition, %
ANSID UNSAluminumSiliconIronCopper Manga-
nese		 Magne-
sium		 ChromiumNickelZincTitaniumTinOther
ElementsE
EachTotalF
204.0 A02040remainder0.200.354.2–5.0 0.100.15–0.35... 0.05 0.100.15–0.300.050.05 0.15
242.0 A02420remainder 0.71.03.5–4.5 0.351.2–1.8 0.25 1.7–2.3 0.350.25...0.050.15
296.0remainder 2.0–3.01.24.0–5.00.350.05 ... 0.35 0.500.25 ......0.35
308.0remainder 5.0–6.01.04.0–5.00.500.10 ... ... 1.00.25 ......0.50
319.0 A03190remainder5.5–6.51.03.0–4.00.500.10 ... 0.35 1.00.25 ......0.50
332.0GA03320 remainder8.5–10.51.22.0–4.00.50 0.50–1.5 ... 0.50 1.0 0.25 ......0.50
333.0 A03330remainder8.0–10.01.03.0–4.00.500.05–0.50 ... 0.50 1.00.25 ......0.50
336.0GA03360 remainder11.0–13.01.2 0.50–1.50.350.7–1.3 ...2.0–3.0 0.350.25 ...0.05...
354.0 A03540remainder8.6–9.40.201.6–2.00.100.40–0.6 ... ... 0.100.20 ...0.050.15
355.0 A03550remainder4.5–5.50.6H1.0–1.50.50H0.40–0.6 0.25 ... 0.350.25...0.050.15
C355.0 A33550remainder4.5–5.50.201.0–1.50.100.40–0.6 ... ... 0.100.20 ...0.050.15
356.0 A03560remainder6.5–7.50.6H0.250.35H0.20–0.45 ... ... 0.350.25...0.050.15
A356.0 A13560remainder6.5–7.50.200.20 0.100.25–0.45 ... ... 0.100.20...0.050.15
357.0remainder 6.5–7.50.150.050.030.45–0.6 ... ... 0.050.20...0.050.15
A357.0 A13570remainder6.5–7.50.200.20 0.100.40–0.7 ... ... 0.100.04–0.20 ...0.05I0.15
E357.0remainder6.5–7.50.100.100.55–0.6.........0.10–0.20...0.05J0.15
F357.0remainder6.5–7.50.100.200.100.40–0.7......0.100.04–0.20...0.05J0.15
359.0 A03590remainder8.5–9.50.200.20 0.100.50–0.7 ... ... 0.100.20 ...0.050.15
443.0 A04430remainder4.5–6.00.80.6 0.500.05 0.25 ... 0.500.25... ...0.35
B443.0 A24430remainder4.5–6.00.80.15 0.350.05 ... ... 0.350.25 ... 0.050.15
A444.0 A14440remainder6.5–7.50.200.10 0.100.05 ... ... 0.100.20... 0.050.15
513.0GA05130 remainder0.300.400.100.303.5–4.5 ... ...1.4–2.20.20...0.050.15
535.0 A05350remainder0.150.150.050.10–0.256.2–7.5 ... ... ...0.10–0.25 ...0.05K 0.15
705.0 A07050remainder0.200.80.200.40–0.61.4–1.80.20–0.40 ...2.7–3.30.25 ...0.050.15
707.0 A07070remainder0.200.80.200.40–0.61.8–2.40.20–0.40 ...4.0–4.50.25 ...0.050.15
711.0GA07110 remainder0.300.7–1.40.35–0.650.05 0.25–0.45 ... ...6.0–7.0 0.20...0.050.15
713.0 A07130remainder0.251.10.40–1.0 0.60.20–0.50 0.35 0.157.0–8.00.25 ...0.100.25
850.0 A08500remainder 0.70.70.7–1.3 0.100.10 ...0.7–1.3 ...0.205.5–7.0...0.30
851.0GA08510 remainder2.0–3.00.70.7–1.30.10 0.10 ...0.3–0.7 ...0.205.5–7.0...0.30
852.0GA08520 remainder0.400.71.7–2.30.10 0.6–0.9 ...0.9–1.5 ...0.205.5–7.0...0.30

A When single units are shown, these
국제분류(ICS)코드
페이지수 18
Edition 12

이력정보

No. 표준번호 표준명 발행일 상태
1 ASTM B108/B108M-19상세보기 Standard Specification for Aluminum-Alloy Permanent Mold Castings 2019-09-01 표준
2 ASTM B108/B108M-19 REDLINE상세보기 Standard Specification for Aluminum-Alloy Permanent Mold Castings 2019-09-01 표준
3 ASTM B108/B108M-18e1상세보기 Standard Specification for Aluminum-Alloy Permanent Mold Castings 2018-05-15 구판
4 ASTM B108/B108M-18상세보기 Standard Specification for Aluminum-Alloy Permanent Mold Castings 2018-05-15 구판
5 ASTM B108/B108M-15상세보기 Standard Specification for Aluminum-Alloy Permanent Mold Castings 2015-05-01 구판
6 ASTM B108/B108M-14상세보기 Standard Specification for Aluminum-Alloy Permanent Mold Castings 2014-10-01 구판
7 ASTM B108/B108M-12e1상세보기 Standard Specification for Aluminum-Alloy Permanent Mold Castings 2012-05-01 구판
8 ASTM B108/B108M-12상세보기 Standard Specification for Aluminum-Alloy Permanent Mold Castings 2012-05-01 구판
9 ASTM B108/B108M-11상세보기 Standard Specification for Aluminum-Alloy Permanent Mold Castings 2011-12-01 구판
10 ASTM B108/B108M-08상세보기 Standard Specification for Aluminum-Alloy Permanent Mold Castings 2008-06-01 구판

관련상품

  • 관련상품이 존재하지 않습니다.

다른 사람이 함께 구입한 상품

  • 함께 구입한 상품이 존재하지 않습니다.

추천 상품

제공형태 닫기

  • PDF :

    직접 파일 다운로드 및 인쇄(마이페이지 확인)

  • 보안PDF :

    직접 파일 다운로드 및 인쇄(마이페이지 확인)* 단, 파일이동 및 복사 불가, 1회 다운로드 및 인쇄가능

  • PRINT :

    인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)

  • BOOK :

    인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)

  • ZIP :

    압축파일형태로 제공 (PDF, HTML, TXT, XLS 등으로 구성), 직접 파일 다운로드(마이페이지 확인)

  • CD/DVD :

    직접 파일 다운로드 및 인쇄(마이페이지 확인)

  • DB :

    별도 정보 제공

  • HARDCOPY :

    해외 배송 상품, 최대 3주 소요

  • 바인더 :

    바인더 우편발송, 2~3일 소요

  • 온라인구독 :

    WEB 접속 후 실시간 열람, 출력(1년간)