QUICK

TOP

해외표준 상세정보

관심표준 등록 : 표준업데이트 시 알림서비스

제공형태 더보기
  • KS

    구판

    판매

    ASTM B107/B107M-12

    Standard Specification for Magnesium-Alloy Extruded Bars, Rods, Profiles, Tubes, and Wire
    • 발행일 : 2012-11-01
    • 발행기관 : ASTM
    즐겨찾기 장바구니 담기
    닫기

    상품이 장바구니에 담겼습니다.

    장바구니로 이동
    • [영어]PDF 144,300원

    • [영어]PRINT 144,300원

상세정보

분야 02.02 : 알루미늄 및 마그네슘 합금
적용범위

1.1 This specification covers magnesium-alloy extruded bars, rods, profiles, tubes, and wire of the composition given in Table 1.

TABLE 1 Chemical RequirementsA
Note 1Analysis shall regularly be made only for the elements specifically mentioned in this table. If, however, the presence of other elements is suspected or indicated in the course of routine analysis to be in amounts greater than the specified limits, further analysis shall be made to determine that the total of these other elements is not in excess of the limits specified in the last column of the table.
Note 2The following applies to all specified limits in this table: For purposes of acceptance and rejection, an observed value or a calculated value obtained from analysis should be rounded-off to the nearest unit in the last right-hand place of figures used in expressing the specified limit.

AlloyB

Composition, %

UNS
No.

ASTM
No.

Magnesium

Alumi-
num

Cal-
cium

Cop-
per

Iron

Lithium

Man-
ganese

Neodymium

Nickel

Rare
Earths

Sili-
con

Yttrium

Zirco-
nium,
min

Zinc

Other
Impurities,
each

Total
OtherC
Impurities

M11311

AZ31B

remainder

2.5-3.5

0.04

0.05

0.005

 

0.20-1.0

 

0.005

 

0.10

 

...

0.6-1.4

 

0.30

M11312

AZ31C

remainder

2.4-3.6

...

0.10

...

 

0.15-1.0D

 

0.03

 

0.10

 

...

0.50-1.5

 

0.30

M11610

AZ61A

remainder

5.8-7.2

...

0.05

0.005

 

0.15-0.5

 

0.005

 

0.10

 

...

0.40-1.5

 

0.30

M11800

AZ80A

remainder

7.8-9.2

...

0.05

0.005

 

0.12-0.5

 

0.005

 

0.10

 

...

0.20-0.8

 

0.30

M15100

M1A

remainder

...

0.30

0.05

...

 

1.2-2.0

 

0.01

 

0.10

 

...

...

 

0.30

M18432

WE43B

remainder

...

...

0.02

0.010

0.2

0.03

2.0-2.5

0.005

1.9E

...

3.7-4.3

0.40-1.0

F

0.01

...

M18410

WE54A

remainder

...

...

0.03

...

0.2

0.03

1.5-2.0

0.005

2.0E

0.01

4.75-5.5

0.40-1.0

0.20

0.2

...

M16400

ZK40A

remainder

...

...

...

...

 

...

 

...

 

...

 

0.45

3.5–4.5

 

0.30

M16600

ZK60A

remainder

...

...

...

...

 

...

 

...

 

...

 

0.45

4.8-6.2

 

0.30

A Limits are in weight percent maximum unless shown as a range or otherwise stated.
B These alloy designations were established in accordance with Practice B951 (see also Practice E527).
C Includes listed elements for which no specific limit is shown.
D Manganese minimum limit need not be met if iron is 0.005 %, or less.
E Other Rare Earths shall be principally heavy rare earths, for example, Gadolinium, Dysprosium, Erbium, and Ytterbium. Other Rare Earths are derived from the Yttrium, typically 80 % Yttrium 20 % heavy rare earths.
F Zinc + Silver content shall not exceed 0.20 % in WE43B.

1.2 The values stated in either inch-pound or SI units are to be regarded separately as standards. The SI units are shown in brackets or in separate tables or columns. The values stated in each system are not exact equivalents; therefore, each system must be used independent of the other. Combining values from the two systems may result in nonconformance with the specification.

1.3 Unless the order specifies the “M” specification designation, the material shall be furnished to the inch-pound units.

국제분류(ICS)코드
페이지수 19
Edition 12

이력정보

No. 표준번호 표준명 발행일 상태
1 ASTM B107/B107M-13(2021)상세보기 Standard Specification for Magnesium-Alloy Extruded Bars, Rods, Profiles, Tubes, and Wire 2021-12-01 표준
2 ASTM B107/B107M-13상세보기 Standard Specification for Magnesium-Alloy Extruded Bars, Rods, Profiles, Tubes, and Wire 2013-11-01 구판
3 ASTM B107/B107M-13 REDLINE상세보기 Standard Specification for Magnesium-Alloy Extruded Bars, Rods, Profiles, Tubes, and Wire 2013-11-01 구판
4 ASTM B107/B107M-12상세보기 Standard Specification for Magnesium-Alloy Extruded Bars, Rods, Profiles, Tubes, and Wire 2012-11-01 구판
5 ASTM B107/B107M-07상세보기 Standard Specification for Magnesium-Alloy Extruded Bars, Rods, Profiles, Tubes, and Wire 2007-06-01 구판
6 ASTM B107/B107M-06상세보기 Standard Specification for Magnesium-Alloy Extruded Bars, Rods, Profiles, Tubes, and Wire 2006-03-01 구판
7 ASTM B107/B107M-00상세보기 Standard Specification for Magnesium-Alloy Extruded Bars, Rods, Profiles, Tubes, and Wire 2000-05-10 구판
8 ASTM B107/B107M-94상세보기 Standard Specification for Magnesium-Alloy Extruded Bars, Rods, Profiles, Tubes, and Wire 2000-05-10 구판

제공형태 닫기

  • PDF :

    직접 파일 다운로드 및 인쇄(마이페이지 확인)
  • 보안PDF :

    직접 파일 다운로드 및 인쇄(마이페이지 확인)* 단, 파일이동 및 복사 불가, 1회 다운로드 및 인쇄가능
  • PRINT :

    인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
  • BOOK :

    인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
  • ZIP :

    압축파일형태로 제공 (PDF, HTML, TXT, XLS 등으로 구성), 직접 파일 다운로드(마이페이지 확인)
  • CD/DVD :

    직접 파일 다운로드 및 인쇄(마이페이지 확인)
  • DB :

    별도 정보 제공
  • HARDCOPY :

    해외 배송 상품, 최대 3주 소요
  • 바인더 :

    바인더 우편발송, 2~3일 소요
  • 온라인구독 :

    WEB 접속 후 실시간 열람, 출력(1년간)