사업자등록증
해외표준
FAQ
장바구니
고객센터
해외표준 상세정보
관심표준 등록 : 표준업데이트 시 알림서비스
제공형태 더보기-
구판
판매
ASTM C203-05a(2017)
Standard Test Methods for Breaking Load and Flexural Properties of Block-Type Thermal Insulation- 발행일 : 2017-09-01
- 발행기관 : ASTM
상세정보
| 분야 | 04.06 : 보온, 방음 |
|---|---|
| 적용범위 | 1.1 These test methods cover the determination of the breaking load and calculated flexural strength of a rectangular cross section of a preformed block-type thermal insulation tested as a simple beam. It is also applicable to cellular plastics. Two test methods are described as follows: 1.1.1 Test Method I—A loading system utilizing center loading on a simply supported beam, supported at both ends. 1.1.2 Test Method II—A loading system utilizing two symmetric load points equally spaced from their adjacent support points at each end with a distance between load points of one half of the support span. 1.2 Either test method is capable of being used with the four procedures that follow: 1.2.1 Procedure A—Designed principally for materials that break at comparatively small deflections. 1.2.2 Procedure B—Designed particularly for those materials that undergo large deflections during testing. 1.2.3 Procedure C—Designed for measuring at a constant stress rate, using a CRL (constant rate of loading) machine. Used for breaking load measurements only. 1.2.4 Procedure D—Designed for measurements at a constant crosshead speed, using either a CRT (constant rate of traverse) or CRE (constant rate of extension) machine. Used for breaking load measurements using a fixed crosshead speed machine. 1.3 Comparative tests are capable of being run according to either method or procedure, provided that the method or procedure is found satisfactory for the material being tested. 1.4 These test methods are purposely general in order to accommodate the widely varying industry practices. It is important that the user consult the appropriate materials specification for any specific detailed requirements regarding these test methods. 1.5 The values stated in SI units are to be regarded as the standard. The values given in parentheses are provided for information only. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. For specific precautionary statements, see Section 11 1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. |
| 국제분류(ICS)코드 | 91.100.60 : 방열 및 방음 재료 |
| 페이지수 | 7 |
| Edition | 05a(2017) |
이력정보
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | ASTM C203-22상세보기 | Standard Test Methods for Breaking Load and Flexural Properties of Block-Type Thermal Insulation | 2022-09-01 | 표준 |
| 2 | ASTM C203-22 REDLINE상세보기 | Standard Test Methods for Breaking Load and Flexural Properties of Block-Type Thermal Insulation | 2022-09-01 | 표준 |
| 3 | ASTM C203-05a(2017)상세보기 | Standard Test Methods for Breaking Load and Flexural Properties of Block-Type Thermal Insulation | 2017-09-01 | 구판 |
| 4 | JASO C203-13상세보기 | Bench Performance Test Procedure for Manual Transmission | 2013-01-01 | 폐지 |
| 5 | ASTM C203-05a(2012)상세보기 | Standard Test Methods for Breaking Load and Flexural Properties of Block-Type Thermal Insulation | 2012-03-01 | 구판 |
| 6 | ASTM C203-05a상세보기 | Standard Test Methods for Breaking Load and Flexural Properties of Block-Type Thermal Insulation | 2005-11-01 | 구판 |
| 7 | ASTM C203-05상세보기 | Standard Test Methods for Breaking Load and Flexural Properties of Block-Type Thermal Insulation | 2005-05-01 | 구판 |
| 8 | ASTM C203-99상세보기 | Standard Test Methods for Breaking Load and Flexural Properties of Block-Type Thermal Insulation | 1999-03-10 | 구판 |
| 9 | JASO C203-85상세보기 | Bench Performance Test Procedure for Manual Transmission | 1985-01-01 | 구판 |
관련상품
- 관련상품이 존재하지 않습니다.
다른 사람이 함께 구입한 상품
- ASTM C518-17 - Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus
- ASTM C177-19 - Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus
- ASTM D1622/D1622M-14 - Standard Test Method for Apparent Density of Rigid Cellular Plastics
- ASTM E96/E96M-16 - Standard Test Methods for Water Vapor Transmission of Materials
- ASTM C165-07(2017) - Standard Test Method for Measuring Compressive Properties of Thermal Insulations
추천 상품
- IEC TS 63134:2020 - Active assisted living (AAL) use cases
- IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification
- KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs)
- KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs)
- KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스
제공형태 닫기
PDF :
직접 파일 다운로드 및 인쇄(마이페이지 확인)보안PDF :
직접 파일 다운로드 및 인쇄(마이페이지 확인)* 단, 파일이동 및 복사 불가, 1회 다운로드 및 인쇄가능PRINT :
인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)BOOK :
인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)ZIP :
압축파일형태로 제공 (PDF, HTML, TXT, XLS 등으로 구성), 직접 파일 다운로드(마이페이지 확인)CD/DVD :
직접 파일 다운로드 및 인쇄(마이페이지 확인)DB :
별도 정보 제공HARDCOPY :
해외 배송 상품, 최대 3주 소요바인더 :
바인더 우편발송, 2~3일 소요온라인구독 :
WEB 접속 후 실시간 열람, 출력(1년간)