해외표준 상세정보
관심표준 등록 : 표준업데이트 시 알림서비스
제공형태 더보기-
표준
판매
ASTM F623-19
Standard Performance Specification for Foley Catheter- 발행일 : 2019-03-01
- 발행기관 : ASTM
상세정보
분야 | 13.01 : 의료기, 외과용 도구 및 장비 |
---|---|
적용범위 | 1.1 This performance specification establishes performance requirements for the short-term utilization of a single-use, balloon-retention catheter, French sizes 12 through 26 inclusive, used by the medical professions for providing a means of bladder drainage by means of the urethra. The product is manufactured in various sizes and materials such as latex, silicone, rubber, and various polymers (as well as combinations of these) and is provided non-sterile for sterilization and sterile for single use only. Catheters whose surface has been chemically treated to effect biocompatibility or microbial properties may be tested to this specification. 1.2 Catheters whose surface has been chemically treated to enhance their lubricity with a coating may be tested to this specification. 1.3 The annexes in this specification include detailed information, such as apparatus or materials for this specification. 1.4 The appendixes in this specification contain information intended to provide guidance only and are not a mandatory part of the specification. 1.5 Regulatory bodies may require additional information, such as clinical data, to support different design features. 1.6 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.7 Exclusions—Long-term indwelling usage (over 30 days) is encountered with this product, but not commonly, and is therefore considered an exception to this specification. Similarly, the use of such catheters for nonurethral catheterization (such as for nephrostomy, suprapubic cystostomy, ureterostomy, gastrostomy, enemas, and so forth) is excluded from the scope of this specification. Likewise, three lumen catheters, 30-cm3 balloon and pediatric catheters, and catheters whose surface has been enhanced for lubricity using liquids or gels. 1.8 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.9 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. |
국제분류(ICS)코드 | 11.040.20 : 수혈. 주입. 주사장비 |
페이지수 | 10 |
Edition | 19 |
이력정보
No. | 표준번호 | 표준명 | 발행일 | 상태 |
---|---|---|---|---|
1 | ASTM F623-19상세보기 | Standard Performance Specification for Foley Catheter | 2019-03-01 | 표준 |
2 | ASTM F623-19 REDLINE상세보기 | Standard Performance Specification for Foley Catheter | 2019-03-01 | 표준 |
3 | ASTM F623-99(2013)상세보기 | Standard Performance Specification for Foley Catheter | 2013-10-01 | 구판 |
4 | ASTM F623-99(2006)상세보기 | Standard Performance Specification for Foley Catheter | 2006-09-01 | 구판 |
5 | ASTM F623-99상세보기 | Standard Performance Specification for Foley Catheter | 1999-10-10 | 구판 |
6 | ASTM F623-99e1상세보기 | Standard Performance Specification for Foley Catheter | 1999-10-10 | 구판 |
관련상품
- 관련상품이 존재하지 않습니다.
다른 사람이 함께 구입한 상품
- ISO 20696:2018 - Sterile urethral catheters for single use
- DIN EN ISO 20696:2020-10 - Sterile urethral catheters for single use (ISO 20696:2018, Corrected version 2019-12); German version EN ISO 20696:2018
- ISO 10555-1:2013/Amd 1:2017 - Intravascular catheters — Sterile and single-use catheters — Part 1: General requirements — Amendment 1
- ISO 10555-4:2013 - Intravascular catheters — Sterile and single-use catheters — Part 4: Balloon dilatation catheters
- ISO 10555-6:2015 - Intravascular catheters — Sterile and single-use catheters — Part 6: Subcutaneous implanted ports
추천 상품
- IEC TS 63134:2020 - Active assisted living (AAL) use cases
- IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification
- KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs)
- KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs)
- KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스
제공형태 닫기
PDF :
직접 파일 다운로드 및 인쇄(마이페이지 확인)보안PDF :
직접 파일 다운로드 및 인쇄(마이페이지 확인)* 단, 파일이동 및 복사 불가, 1회 다운로드 및 인쇄가능PRINT :
인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)BOOK :
인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)ZIP :
압축파일형태로 제공 (PDF, HTML, TXT, XLS 등으로 구성), 직접 파일 다운로드(마이페이지 확인)CD/DVD :
직접 파일 다운로드 및 인쇄(마이페이지 확인)DB :
별도 정보 제공HARDCOPY :
해외 배송 상품, 최대 3주 소요바인더 :
바인더 우편발송, 2~3일 소요온라인구독 :
WEB 접속 후 실시간 열람, 출력(1년간)