관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
구판
판매
Standard Practice for Ammonia Colorimetric Leak Testing
| 분야 | 03.03 : 비 파괴검사 (Ⅰ) |
|---|---|
| 적용범위 | 1.1 This practice covers the testing of large single- and double-walled tanks, pressure and vacuum vessels, laminated, lined- or double-walled parts, complex piping systems, flexible containers (such as aircraft fuel tanks), glass-to-metal seals in hybrid packages, and systems that inherently contain or will contain ammonia (such as large tonnage refrigeration systems and fertilizer storage systems). 1.2 This method can be used on piping, valves, and containers with welded, fitted, or laminated sections that can be sealed at their ends or between their outer and inner walls and that are designed for internal pressures of 34.5 kPa [5 psig] or greater. 1.3 Basic procedures are described based on the type of inspection used. These procedures should be limited to finding leakage indications of 4.5 × 10− 12 mol/s [1 × 10−7 Std cm 3/s]2 or larger. 1.4 Units—The values stated in Std cm3/s or mol/s are to be regarded separately as standard. The values stated in each system are not necessarily exact equivalents; therefore, to ensure conformance with the standard, each system shall be used independently of the other, and values from the two systems shall not be combined. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. (For more specific safety precautionary information see 7.4, 8.2, 9.4.1, and 10.3.1). 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. |
| 국제분류(ICS)코드 | 17.180.20 : 빛의 색 및 측정 |
| 페이지수 | 5 |
| Edition | 19 |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | ASTM E1066/E1066M-19(2024) | Standard Practice for Ammonia Colorimetric Leak Testing | 2024-06-01 | 표준 |
| 2 | ASTM E1066/E1066M-19 | Standard Practice for Ammonia Colorimetric Leak Testing | 2019-05-01 | 구판 |
| 3 | ASTM E1066/E1066M-19 REDLINE | Standard Practice for Ammonia Colorimetric Leak Testing | 2019-05-01 | 구판 |
| 4 | ASTM E1066/E1066M-12 | Standard Practice for Ammonia Colorimetric LeakTesting | 2012-06-15 | 구판 |
관련상품이 존재하지 않습니다.
AHRI 510 :2006 - Performance Rating Of Positive Displacement Ammonia Compressors and Compressor Units (Air-Conditioning, Heating and Refrigeration Institute (AHRI)) 상세보기
ASABE S620 :2022 - Safety for Anhydrous Ammonia Application Equipment (American Society of Agricultural and Biological Engineers (ASABE)) 상세보기
AWWA B305 :2015 - Anhydrous Ammonia 상세보기
AWWA B306 :2015 - Aqua Ammonia (Liquid Ammonium Hydroxide) 상세보기
CGA G-2 :2021 - ANHYDROUS AMMONIA 상세보기
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
