QUICK

TOP

해외표준 상세정보

관심표준 등록 : 표준업데이트 시 알림서비스

제공형태 더보기
  • KS

    표준

    판매

    ASTM D2369-24

    Standard Test Method for Volatile Content of Coatings
    • 발행일 : 2024-02-01
    • 발행기관 : ASTM
    즐겨찾기 장바구니 담기
    닫기

    상품이 장바구니에 담겼습니다.

    장바구니로 이동
    • [영어]PDF 109,400원

    • [영어]PRINT 109,400원

상세정보

분야 06.01 : 페인트-화학적, 물리적, 광학적특성 시험; 현상
적용범위

1.1?This test method describes a procedure for the determination of the weight percent volatile content of solventborne and waterborne coatings. Test specimens are heated at 110?°C ± 5?°C?for 60 min.

Note 1:?The coatings used in these round-robin studies represented air-dried, air-dried oxidizing, heat-cured baking systems, and also included multicomponent paint systems.

1.2?Sixty minutes at 110?°C ± 5?°C is a general purpose test method based on the precision obtained with both solventborne and waterborne coatings (see Section 9).

1.3?This test method is viable for coatings wherein one or more parts may, at ambient conditions, contain liquid coreactants that are volatile until a chemical reaction has occurred with another component of the multi-package system.

Note 2:?Committee D01 has run round-robin studies on volatiles of multicomponent paint systems. The only change in procedure is to premix the weighed components in the correct proportions and allow the specimens to stand at room temperature for 1 h prior to placing them into the oven.

1.4?Test Method D5095 for Determination of the Nonvolatile Content in Silanes, Siloxanes and Silane-Siloxane Blends Used in Masonry Water Repellent Treatments is the standard method for nonvolatile content of these types of materials.

1.5?Test Methods D5403 for Volatile Content of Radiation Curable Materials is the standard method for determining nonvolatile content of radiation curable coatings, inks and adhesives.

1.6?Test Method D6419 for Volatile Content of Sheet-Fed and Coldset Web Offset Printing Inks is the method of choice for these types of printing inks.

1.7?This test method may not be applicable to all types of coatings. Other procedures may be substituted with mutual agreement between the producer and the user.

Note 3:?If unusual decomposition or degradation of the specimen occurs during heating, the actual time and temperature used to cure the coating in practice may be substituted for the time and temperature specified in this test method, subject to mutual agreement between the producer and the user. The U.S. EPA Reference Method?24 specifies 110?°C ±?5?°C for 1 h for coatings.

Note 4:?Practice D3960 for Determining Volatile Organic Compound (VOC) Content of Paints and Related Coatings describes procedures and calculations and provides guidance on selecting test methods to determine VOC content of solventborne and waterborne coatings.

1.8?The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.9?This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.10?This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

국제분류(ICS)코드 87.040 : 페인트 및 니스
페이지수 6
Edition 24

이력정보

No. 표준번호 표준명 발행일 상태
1 ASTM D2369-24상세보기 Standard Test Method for Volatile Content of Coatings 2024-02-01 표준
2 ASTM D2369-24 REDLINE상세보기 Standard Test Method for Volatile Content of Coatings 2024-02-01 표준
3 ASTM D2369-20 REDLINE상세보기 Standard Test Method for Volatile Content of Coatings 2020-06-01 구판
4 ASTM D2369-20상세보기 Standard Test Method for Volatile Content of Coatings 2020-06-01 구판
5 ASTM D2369-10(2015)e1상세보기 Standard Test Method for Volatile Content of Coatings 2015-06-01 구판
6 ASTM D2369-10e1상세보기 Standard Test Method for Volatile Content of Coatings 2011-07-01 구판
7 ASTM D2369-10상세보기 Standard Test Method for Volatile Content of Coatings 2010-07-01 구판
8 ASTM D2369-07상세보기 Standard Test Method for Volatile Content of Coatings 2007-07-01 구판
9 ASTM D2369-04상세보기 Standard Test Method for Volatile Content of Coatings 2004-03-01 구판
10 ASTM D2369-03상세보기 Standard Test Method for Volatile Content of Coatings 2003-01-10 구판
11 ASTM D2369-01e1상세보기 Standard Test Method for Volatile Content of Coatings 2001-01-10 구판
12 ASTM D2369-01상세보기 Standard Test Method for Volatile Content of Coatings 2001-01-10 구판
13 ASTM D2369-98상세보기 Standard Test Method for Volatile Content of Coatings 2001-01-10 구판
14 ASTM D2369-95상세보기 Standard Test Method for Volatile Content of Coatings 구판
15 ASTM D2369-93상세보기 Standard Test Method for Volatile Content of Coatings 구판
16 ASTM D2369-92상세보기 Standard Test Method for Volatile Content of Coatings 구판
17 ASTM D2369-90상세보기 Standard Test Method for Volatile Content of Coatings 구판
18 ASTM D2369-87상세보기 Standard Test Method for Volatile Content of Coatings 구판
19 ASTM D2369-81e1상세보기 Standard Test Method for Volatile Content of Coatings 구판

관련상품

  • 관련상품이 존재하지 않습니다.

제공형태 닫기

  • PDF :

    직접 파일 다운로드 및 인쇄(마이페이지 확인)
  • 보안PDF :

    직접 파일 다운로드 및 인쇄(마이페이지 확인)* 단, 파일이동 및 복사 불가, 1회 다운로드 및 인쇄가능
  • PRINT :

    인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
  • BOOK :

    인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
  • ZIP :

    압축파일형태로 제공 (PDF, HTML, TXT, XLS 등으로 구성), 직접 파일 다운로드(마이페이지 확인)
  • CD/DVD :

    직접 파일 다운로드 및 인쇄(마이페이지 확인)
  • DB :

    별도 정보 제공
  • HARDCOPY :

    해외 배송 상품, 최대 3주 소요
  • 바인더 :

    바인더 우편발송, 2~3일 소요
  • 온라인구독 :

    WEB 접속 후 실시간 열람, 출력(1년간)