사업자등록증
해외표준
FAQ
장바구니
고객센터
해외표준 상세정보
관심표준 등록 : 표준업데이트 시 알림서비스
제공형태 더보기-
폐지
판매
CAN/CSA-ISO 19904-1-07 (R2017)
Petroleum and Natural Gas Industries - Floating Offshore Structures - Part 1: Monohulls, Semi-Submersibles and Spars (Adopted ISO 19904-1:2006, first edition, 2006-11-01)- 발행일 : 2007-01-01
- 발행기관 : CSA
상세정보
| 분야 | |
|---|---|
| 적용범위 | Preface This is the first edition of CAN/CSA-ISO 19904-1, Petroleum and natural gas industries - Floating offshore structures - Part 1: Monohulls, semi-submersibles and spars, which is an adoption without modification of the identically titled ISO (International Organization for Standardization) Standard 19904-1 (first edition, 2006-11-01). At the time of publication, ISO 19904-1:2006 is available from ISO in English only. CSA will publish the French version when it becomes available from ISO.? Scope This part of ISO 19904 provides requirements and guidance for the structural design and/or assessment of floating offshore platforms used by the petroleum and natural gas industries to support the following functions: ?production ?storage and/or offloading ?drilling and production ?production, storage and offloading ?drilling, production, storage and offloading.? NOTE 1 Floating offshore platforms are often referred to using a variety of abbreviations, e.g. FPS, FSU, FPSO, etc. (see Clauses 3 and 4), in accordance with their intended mission.? NOTE 2 In this part of ISO 19904, the term "floating structure", sometimes shortened to "structure", is used as a generic term to indicate the structural systems of any member of the classes of platforms defined above.? NOTE 3 In some cases, floating platforms are designated as "early production platforms". This term relates merely to an asset development strategy. For the purposes of this International Standard, the term "production" includes "early production".? Its requirements do not apply to the structural systems of mobile offshore units (MOUs). These include, among others: floating structures intended primarily to perform drilling and/or well intervention operations (often referred to as MODUs), even when used for extended well test operations; floating structures used for offshore construction operations (e.g. crane barges or pipelay barges), for temporary or permanent offshore living quarters (floatels), or for transport of equipment or products (e.g. transportation barges, cargo barges), for which structures reference is made to relevant recognized classification society (RCS) rules.? Its requirements are applicable to all possible life-cycle stages of the structures defined above, such as design, construction and installation of new structures, including requirements for inspection, integrity management and future removal, structural integrity management covering inspection and assessment of structures in-service, and conversion of structures for different use (e.g. a tanker converted to a production platform) or reuse at different locations.? The following types of floating structure are explicitly considered within the context of this part of ISO 19904: a) monohulls (ship-shaped structures and barges) b) semi-submersibles c) spars.? In addition to the structural types listed above, this part of ISO 19904 covers other floating platforms intended to perform the above functions, consisting of partially submerged buoyant hulls made up of any combination of plated and space frame components and used in conjunction with the station keeping systems covered in ISO 19901-7. These other structures can have a great range of variability in geometry and structural forms and, therefore, can be only partly covered by the requirements of this part of ISO 19904. In other cases, specific requirements stated in this part of ISO 19904 can be found not to apply to all or part of a structure under design.? In all the above cases, conformity with this part of ISO 19904 will require that the design is based upon its underpinning principles and achieves a level of safety equivalent, or superior, to the level implicit in it.? NOTE 4 The speed of evolution of offshore technology often far exceeds the pace at which the industry achieves substantial agreement on innovation in structural concepts, structural shapes or forms, structural components and associated analysis and design practices, which are continuously refined and enhanced. On the other hand, International Standards can only capture explicit industry consensus, which requires maturation and acceptance of new ideas.? Consequently, advanced structural concepts can, in some cases, only be partly covered by the provisions of this part of ISO 19904.? This part of ISO 19904 is applicable to steel floating structures. The principles documented herein are, however, considered to be generally applicable to structures fabricated in materials other than steel. |
| 국제분류(ICS)코드 | |
| 페이지수 | 309 |
| Edition |
이력정보
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | CSA ISO 19904-1:20상세보기 | Petroleum and natural gas industries — Floating offshore structures — Part 1: Ship-shaped, semi-submersible, spar and shallow-draught cylindrical structures (Adopted ISO 19904-1:2019, second edition, 2019-05) | 2020-01-01 | 폐지 |
| 2 | ISO 19904-1:2019상세보기 | Petroleum and natural gas industries — Floating offshore structures — Part 1: Ship-shaped, semi-submersible, spar and shallow-draught cylindrical structures | 2019-05-10 | 표준 |
| 3 | CAN/CSA-ISO 19904-1-07 (R2017)상세보기 | Petroleum and Natural Gas Industries - Floating Offshore Structures - Part 1: Monohulls, Semi-Submersibles and Spars (Adopted ISO 19904-1:2006, first edition, 2006-11-01) | 2007-01-01 | 폐지 |
| 4 | ISO 19904-1:2006상세보기 | Petroleum and natural gas industries — Floating offshore structures — Part 1: Monohulls, semi-submersibles and spars | 2006-10-20 | 구판 |
다른 사람이 함께 구입한 상품
- 함께 구입한 상품이 존재하지 않습니다.
추천 상품
- IEC TS 63134:2020 - Active assisted living (AAL) use cases
- IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification
- KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs)
- KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs)
- KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스
제공형태 닫기
PDF :
직접 파일 다운로드 및 인쇄(마이페이지 확인)보안PDF :
직접 파일 다운로드 및 인쇄(마이페이지 확인)* 단, 파일이동 및 복사 불가, 1회 다운로드 및 인쇄가능PRINT :
인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)BOOK :
인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)ZIP :
압축파일형태로 제공 (PDF, HTML, TXT, XLS 등으로 구성), 직접 파일 다운로드(마이페이지 확인)CD/DVD :
직접 파일 다운로드 및 인쇄(마이페이지 확인)DB :
별도 정보 제공HARDCOPY :
해외 배송 상품, 최대 3주 소요바인더 :
바인더 우편발송, 2~3일 소요온라인구독 :
WEB 접속 후 실시간 열람, 출력(1년간)