사업자등록증
해외표준
FAQ
장바구니
고객센터
해외표준 상세정보
관심표준 등록 : 표준업데이트 시 알림서비스
제공형태 더보기-
표준
판매
SPE-14040-14
Life cycle assessment of auto parts - Guidelines for conducting LCA of auto parts incorporating weight changes due to material composition, manufacturing technology, or part geometry- 발행일 : 2014-01-01
- 발행기관 : CSA
상세정보
| 분야 | |
|---|---|
| 적용범위 | Preface This Guideline establishes the requirements for conducting comparative life cycle assessments (LCA) of auto parts incorporating weight changes due to changes in material composition, manufacturing technology, or part geometry, and in conformance with the International Organization for Standardization (ISO) 14040 series of standards.? Although informative in nature, this Guideline has been written in mandatory language to facilitate adoption by organizations.? Introduction 0.1 The purpose of this Guideline is to provide rules for quantifying the potential environmental impacts of weight changes of automotive parts, components, assemblies, and subassemblies (collectively referred to as "auto part"), manufactured by or for North American automotive OEMs (original equipment manufacturer), and either installed in vehicles or sold on the aftermarket for use in North America, due to changes in material composition, manufacturing technology, or part geometry.? 0.2 This Guideline establishes rules and requirements for conducting comparative life cycle assessment (LCA) studies with the objective of providing clear and consistent guidance for assessing potential environmental impacts throughout the cradle-to-grave life cycle of an auto part with a focus on weight differences between design options. The life cycle stages include? (a) raw material acquisition;? (b) production;? (c) use; and? (d) end-of-life treatment (including recycling and final disposal).? 0.3 This Guideline is primarily aimed at conducting comparative LCA studies on auto parts that are? (a) intended to be installed in a vehicle, for the purpose of supporting internal design decisions in the vehicle development cycle and possible external communication; or? (b) already installed in a vehicle, for the purpose of external communication.? Interested parties include auto part OEMs and suppliers, auto manufacturers, industry associations, governmental organizations, policy makers and other stakeholders who desire reliable information on auto parts.? In conformance with ISO 14044, Clause 6.3, a panel of interested parties conduct critical reviews on LCA studies where the results are intended to be used to support comparative assertion intended to be disclosed to the public.? 0.4 This Guideline enables LCA studies to be conducted using agreed upon and uniform rules, and allows for the comparison of LCA study results between auto parts. Potential uses may include, but are not limited to? (a) design and development decisions for auto parts and automobiles;? (b) evaluation of materials choices and materials substitution options;? (c) evaluation of fabrication and manufacturing options;? (d) assessment of alternative product configurations;? (e) benchmarking for programs aimed at reducing environmental impacts; and? (f) educational purposes, so that a greater understanding of life cycle impacts will inform sourcing and purchasing decisions.? 0.5 This Guideline defines specific rules and requirements for:? (a) the specification of performance characteristics and description of an auto part;? (b) definition of the functional unit and the reference flow for LCA of an auto part;? (c) the system boundaries for the LCA of an auto part;? (d) predetermined parameters to be used in LCA studies of products belonging to the category;? (e) inputs and outputs to be included in LCA studies of an auto part;? (f) sources of data for life cycle inventory analysis of resource inputs and emissions outputs;? (g) data requirements for carrying out the LCA;? (h) life cycle impact assessment category indicators to be included in the LCA;? (i) methodology for calculations in the LCA; and? (j) additional key environmental information that may be relevant for the intended use.? 0.6 In line with ISO 14044, Clause 4.4.5, results calculated using this Guideline are not intended to provide a single overall score or number on the overall environmental performance of these products.? 0.7 This Guideline does not directly address potential social and economic impacts that might be associated with an auto part.? 0.8 This Guideline supports and provides additional rules and requirements for conducting LCA studies in accordance with the ISO 14040 Series of Standards.? Scope 1.1 This Guideline establishes requirements and principles for undertaking comparative LCA studies of auto parts incorporating weight changes due to material composition, manufacturing technology, or part geometry, whether intended or not intended to be disclosed to the public.? 1.2 This Guideline provides a framework for LCA of auto parts made of any material(s) and the effect of weight changes on use stage fuel consumption when comparing two or more design options.? Note: Examples of materials include metals, polymers, bio-based materials, or a combination of materials.? 1.3 This Guideline applies only to auto parts used in vehicles with internal combustion engines (ICE), in accordance with Clause 5.2.? Notes:? (1) Internal combustion engine (ICE) is defined in Clause 3.? (2) Future editions of this Guideline might be expanded to any type of automobile.? 1.4 This Guideline is intended for application in North America.? 1.5 This Guideline does not override, or in any way change, legally required environmental information, claims or labelling, or any other applicable legal requirements. |
| 국제분류(ICS)코드 | |
| 페이지수 | 72 |
| Edition |
이력정보
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | SPE-14040-14상세보기 | Life cycle assessment of auto parts - Guidelines for conducting LCA of auto parts incorporating weight changes due to material composition, manufacturing technology, or part geometry | 2014-01-01 | 표준 |
관련상품
- SPE-900-13 - Solar photovoltaic rooftop-installation best practices guideline
- SPE-7002-14 - Sustainability standard for household portable and floor care appliances (Bi-national standard, with AHAM 7002-2014 and UL 7002)
- SPE-890-15 - A Guideline for accountable management of end-of-life materials
- SPE-2.1 SERIES-18 - Best practices for defueling, decommissioning, and disposal of compressed natural gas vehicle fuel containers and liquefied natural gas vehicle fuel tanks
- CSA SPE-3000:19 - Model code for the field evaluation of medical electrical equipment (MEE) and medical electrical systems (MES)
다른 사람이 함께 구입한 상품
- ASTM E3199-22a - Standard Guide for Alternative Allocation Approaches to Modeling Input and Output Flows of Secondary Materials and Related Recycling Scenarios in Life Cycle Assessment
- DNV-RP-C203 . 19th Edition, September 2021 of offshore steel structures - Fatigue design of offshore steel structures
- SAE J2464_202108 - Electric and Hybrid Electric Vehicle Rechargeable Energy Storage System (RESS) Safety and Abuse Testing
- NA to BS EN 1991-1-2:2002 - UK National Annex to Eurocode 1. Actions on structures. General actions.
- GB 38032-2020 - Electric buses safety requirements
추천 상품
- IEC TS 63134:2020 - Active assisted living (AAL) use cases
- IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification
- KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs)
- KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs)
- KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스
제공형태 닫기
PDF :
직접 파일 다운로드 및 인쇄(마이페이지 확인)보안PDF :
직접 파일 다운로드 및 인쇄(마이페이지 확인)* 단, 파일이동 및 복사 불가, 1회 다운로드 및 인쇄가능PRINT :
인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)BOOK :
인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)ZIP :
압축파일형태로 제공 (PDF, HTML, TXT, XLS 등으로 구성), 직접 파일 다운로드(마이페이지 확인)CD/DVD :
직접 파일 다운로드 및 인쇄(마이페이지 확인)DB :
별도 정보 제공HARDCOPY :
해외 배송 상품, 최대 3주 소요바인더 :
바인더 우편발송, 2~3일 소요온라인구독 :
WEB 접속 후 실시간 열람, 출력(1년간)