사업자등록증
해외표준
FAQ
장바구니
고객센터
해외표준 상세정보
관심표준 등록 : 표준업데이트 시 알림서비스
제공형태 더보기-
표준
판매
CSA C653:18 (R2024)
Photometric performance of roadway and street lighting luminaires- 발행일 : 2018-01-01
- 발행기관 : CSA
상세정보
| 분야 | |
|---|---|
| 적용범위 | Preface This is the fifth edition of CSA C653, Photometric performance of roadway and street lighting luminaires. It supersedes the previous editions published in 2013, 2008, 1994, and 1992. This Standard establishes the minimum performance requirements for roadway and street lighting luminaires. The requirements of this Standard are in addition to those specified in Canadian Electrical Code, Part I; CSA C22.2 No. 250.0, Luminaires; and CAN/CSA-C22.2 NO. 250.13, Light emitting diodes (LEDs) equipment for lighting applications. The major change to this edition includes updating the maximum UPD levels. CSA acknowledges that the development of this Standard was made possible, in part, by the financial support of BC Hydro, the Canadian Electricity Association, Hydro-Qu?bec, Manitoba Hydro, Natural Resources Canada, and the Ontario Ministry of Energy. This Standard has been developed in compliance with Standards Council of Canada requirements for National Standards of Canada. It has been published as a National Standard of Canada by CSA Group. Scope 1.1 This Standard specifies photometric performance requirements for luminaires that are used for roadway and street lighting applications as a function of unit power density (UPD). 1.2 The following light sources are addressed in this Standard: a) clear HPS lamp b) clear metal halide lamp and c) LED. 1.3 This Standard is based on a) average luminance, luminance uniformity ratio, and veiling luminance ratio as defined in ANSI/IES RP-8; b) nominal input power in watts for HID sources; c) rated lamp lumens for HID sources; d) relative photometry for HID sources as per ANSI/IES LM-63 and IES LM-31 e) luminaire input power in watts and rated luminaire lumens for LED sources and does not include constant light output (CLO) applications; and f) absolute photometry for LED sources as per IES LM-79. 1.4 This Standard is not a design document, and is intended to establish luminaire photometric performance efficiency only, based upon typical roadway configuration. Tables 4, 5, and 6 are intended to be used to establish maximum UPD values for typical applications as per the parameters listed in Table 1. UPD values provided in this Standard are not intended for specification or application purposes. User specific road geometries could differ from the templates used in the creation of these Tables. Requirements of specific designs might necessitate different variations in distribution, lumen packages, and wattages. Users should review UPD as a measure of comparison across suppliers, within their own geometry, and should note that UPD levels will then vary from the Tables within this Standard. 1.5 In this Standard, "shall" is used to express a requirement, i.e., a provision that the user is obliged to satisfy in order to comply with the Standard; "should" is used to express a recommendation or that which is advised but not required; and "may" is used to express an option or that which is permissible within the limits of the Standard. Notes accompanying clauses do not include requirements or alternative requirements; the purpose of a note accompanying a clause is to separate from the text explanatory or informative material. Notes to tables and figures are considered part of the table or figure and may be written as requirements. Annexes are designated normative (mandatory) or informative (non-mandatory) to define their application. 1.6 The values given in SI units are the units of record for the purposes of this Standard. The values given in parentheses are for information and comparison only. |
| 국제분류(ICS)코드 | |
| 페이지수 | 31 |
| Edition |
이력정보
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | ASTM C653-24상세보기 | Standard Guide for Determination of the Thermal Resistance of Low-Density Blanket-Type Mineral Fiber Insulation | 2024-05-01 | 표준 |
| 2 | ASTM C653-24 REDLINE상세보기 | Standard Guide for Determination of the Thermal Resistance of Low-Density Blanket-Type Mineral Fiber Insulation | 2024-05-01 | 표준 |
| 3 | CSA C653:18 (R2024)상세보기 | Photometric performance of roadway and street lighting luminaires | 2018-01-01 | 표준 |
| 4 | ASTM C653-17상세보기 | Standard Guide for Determination of the Thermal Resistance of Low-Density Blanket-Type Mineral Fiber Insulation | 2017-03-01 | 구판 |
| 5 | ASTM C653-17 REDLINE상세보기 | Standard Guide for Determination of the Thermal Resistance of Low-Density Blanket-Type Mineral Fiber Insulation | 2017-03-01 | 구판 |
| 6 | ASTM C653-97(2012)상세보기 | Standard Guide for Determination of the Thermal Resistance of Low-Density Blanket-Type Mineral Fiber Insulation | 2012-03-01 | 구판 |
| 7 | ASTM C653-97(2007)상세보기 | Standard Guide for Determination of the Thermal Resistance of Low-Density Blanket-Type Mineral Fiber Insulation | 2007-03-01 | 구판 |
| 8 | ASTM C653-97(2002)상세보기 | Standard Guide for Determination of the Thermal Resistance of Low-Density Blanket-Type Mineral Fiber Insulation | 1997-02-10 | 구판 |
| 9 | ASTM C653-97상세보기 | Standard Guide for Determination of the Thermal Resistance of Low-Density Blanket-Type Mineral Fiber Insulation | 1997-02-10 | 구판 |
관련상품
- 관련상품이 존재하지 않습니다.
다른 사람이 함께 구입한 상품
- CSA C22.2 NO. 232:17 (R2021) - Optical fiber cables
- C22.1-18 - Canadian Electrical Code, Part I (24th Edition), Safety Standard for Electrical Installations
- CSA C22.2 NO. 291:19 - Bare and covered ferrules (Binational standard with UL 486F)
- CSA C22.2 NO. 62368-1:19 - Audio/video, information and communication technology equipment - Part 1: Safety requirements (Binational standard with UL 62368-1)
- N289.3-10 (R2015) - Design procedures for seismic qualification of nuclear power plants
추천 상품
- IEC TS 63134:2020 - Active assisted living (AAL) use cases
- IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification
- KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs)
- KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs)
- KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스
제공형태 닫기
PDF :
직접 파일 다운로드 및 인쇄(마이페이지 확인)보안PDF :
직접 파일 다운로드 및 인쇄(마이페이지 확인)* 단, 파일이동 및 복사 불가, 1회 다운로드 및 인쇄가능PRINT :
인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)BOOK :
인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)ZIP :
압축파일형태로 제공 (PDF, HTML, TXT, XLS 등으로 구성), 직접 파일 다운로드(마이페이지 확인)CD/DVD :
직접 파일 다운로드 및 인쇄(마이페이지 확인)DB :
별도 정보 제공HARDCOPY :
해외 배송 상품, 최대 3주 소요바인더 :
바인더 우편발송, 2~3일 소요온라인구독 :
WEB 접속 후 실시간 열람, 출력(1년간)