관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
분야 | TC 14 : Power transformers |
---|---|
적용범위 | IEC/IEEE 60214-2:2019 is published as an IEC/IEEE Dual Logo standard and is intended to assist in the selection of tap-changers designed in accordance with IEC 60214-1 or IEEE Std C57.131 for use in conjunction with the tapped windings of transformers or reactors. Requirements, references and definitions relevant to either IEC 60214-1 or IEEE Std C57.131 are given and their use is described in Clause 4. It is also intended to assist in understanding the various types of tap-changers and their associated equipment available. These application guidelines cover on-load tap-changers (resistor and reactor types) and de-energized tap-changers. This second edition cancels and replaces the first edition published in 2004. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) title has been updated from "Application guide" to "Application guidelines"; b) tap-changers for gas-filled transformers have been added; c) description of typical circuits for regulation has been added; d) description of basic arrangements of tapped windings with on-load tap-changers and de-energized tap-changers has been added; e) types of tap-changers are explained in more detail (e.g. vacuum type on-load tap-changer) and new types have been added (e.g. step-voltage regulator, advance retard switch (ARS), on-load tap-changers for distribution transformers); f) selection of tap-changers (on-load and de-energized) are described in more detail with respect to applications and parameters, which have to be considered (e.g. current wave shapes, operating pressure, temperature conditions, overloading conditions, continuous consecutive operations); g) storage and installation has been considered; h) field service, including commissioning, operation, maintenance and monitoring, has been considered; i) safety aspects have been updated. Keywords: tap-changers |
국제분류(ICS)코드 | 29.180 : 변압기. 반응기 |
페이지수 | 83 |
Edition | 2.0 |
No. | 표준번호 | 표준명 | 발행일 | 상태 |
---|---|---|---|---|
1 | IEC/IEEE 60214-2:2019 | Tap-changers - Part 2: Application guidelines | 2019-06-14 | 표준 |
관련상품이 존재하지 않습니다.
IEC 60137:2017 - Insulated bushings for alternating voltages above 1000 V 상세보기
IEC 62040-1:2017 - Uninterruptible power systems (UPS) - Part 1: Safety requirements 상세보기
IEC 61869-5:2011 - Instrument transformers - Part 5: Additional requirements for capacitor voltage transformers 상세보기
IEC 60099-4:2014 - Surge arresters - Part 4: Metal-oxide surge arresters without gaps for a.c. systems 상세보기
IEC 61869-3:2011 - Instrument transformers - Part 3: Additional requirements for inductive voltage transformers 상세보기
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기