관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
표준
판매
Electric vehicle conductive charging system - Part 25: DC EV supply equipment where protection relies on electrical separation
| 분야 | TC 69 : Electrical power/energy transfer systems for electrically propelled road vehicles and industrial trucks |
|---|---|
| 적용범위 | IEC 61851-25:2020 applies to the DC EV supply equipment for charging electric road vehicles with a rated supply voltage of up to 480 V AC or up to 600 V DC, with rated output voltage not exceeding 120 V DC and output currents not exceeding 100 A DC. This document provides the requirements for the DC EV supply equipment where the secondary circuit is protected from the primary circuit by electrical separation. Requirements for bi-directional power flow are not covered in this document. This document also provides the requirements for the control and the communication between DC EV supply equipment and an EV. This document also applies to DC EV supply equipment supplied from on-site storage systems. The aspects covered in this document include: • characteristics and operating conditions of the DC EV supply equipment; • specification of the connection between the DC EV supply equipment and the EV; • requirements for electrical safety for the DC EV supply equipment. Additional requirements can apply to equipment designed for specific environments or conditions, for example: • DC EV supply equipment located in hazardous areas where flammable gas or vapour and/or combustible materials, fuels or other combustible, or explosive materials are present; • DC EV supply equipment designed to be installed at an altitude of more than 2 000 m; • DC EV supply equipment intended to be used on-board ships. Requirements for electrical devices and components used in DC EV supply equipment are not included in this document and are covered by their specific product standards. This document does not apply to: • safety aspects related to maintenance; • charging of trolley buses, rail vehicles, industrial trucks and vehicles designed primarily for use off-road; • equipment on the EV; • EMC requirements for equipment on the EV while connected, which are covered in IEC 61851-21-1; • charging the RESS off-board the EV. |
| 국제분류(ICS)코드 | 43.120 : 전기차 및 부분품 |
| 페이지수 | 135 |
| Edition | 1.0 |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | IEC 61851-25:2020 | Electric vehicle conductive charging system - Part 25: DC EV supply equipment where protection relies on electrical separation | 2020-12-04 | 표준 |
IEC 61851-21:2001 - Electric vehicle conductive charging system - Part 21: Electric vehicle requirements for conductive connection to an a.c./d.c. supply 상세보기
IEC 61851-22:2001 - Electric vehicle conductive charging system - Part 22: AC electric vehicle charging station 상세보기
IEC 61851-24:2014 - Electric vehicle conductive charging system - Part 24: Digital communication between a d.c. EV charging station and an electric vehicle for control of d.c. charging 상세보기
IEC 61851-23:2014 - Electric vehicle conductive charging system - Part 23: DC electric vehicle charging station 상세보기
IEC 61851-24:2014/COR1:2015 - Corrigendum 1 - Electric vehicle conductive charging system - Part 24: Digital communication between a d.c. EV charging station and an electric vehicle for control of d.c. charging 상세보기
IEC 61851-23:2014 - Electric vehicle conductive charging system - Part 23: DC electric vehicle charging station 상세보기
IEC 61851-24:2014 - Electric vehicle conductive charging system - Part 24: Digital communication between a d.c. EV charging station and an electric vehicle for control of d.c. charging 상세보기
IEC 62893-2:2017 - Charging cables for electric vehicles for rated voltages up to and including 0,6/1 kV - Part 2: Test methods 상세보기
IEC 61851-1:2017 - Electric vehicle conductive charging system - Part 1: General requirements 상세보기
IEC 61982:2012 - Secondary batteries (except lithium) for the propulsion of electric road vehicles - Performance and endurance tests 상세보기
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
