사업자등록증
해외표준
FAQ
장바구니
고객센터
해외표준 상세정보
관심표준 등록 : 표준업데이트 시 알림서비스
제공형태 더보기-
표준
판매
IEC 60695-2-13:2021
Fire hazard testing - Part 2-13: Glowing/hot-wire based test methods - Glow-wire ignition temperature (GWIT) test method for materials- 발행일 : 2021-08-24
- 발행기관 : IEC
상세정보
| 분야 | TC 89 : Fire hazard testing |
|---|---|
| 적용범위 | IEC 60695-2-13:2021 specifies the details of the glow-wire test to be applied to test specimens of solid electrical insulating materials or other solid materials for ignitability testing to determine the glow-wire ignition temperature (GWIT). The GWIT is the temperature which is 25 K (or 30 K) higher than the maximum test temperature, determined during this standardized procedure, at which the tested material does not ignite, or sustained flaming combustion does not occur for a time longer than 5 s for any single flame event and the specimen is not totally consumed. This test is a materials test carried out on a series of standard test specimens. The data obtained, along with data from the glow-wire flammability index (GWFI) test method for materials, IEC 60695-2-12, can then be used in a preselection process in accordance with IEC 60695-1-30 [4] to judge the ability of materials to meet the requirements of IEC 60695-2-11. This basic safety publication focusing on safety test method(s) is primarily intended for use by technical committees in the preparation of safety publications in accordance with the principles laid down in IEC Guide 104 and ISO/IEC Guide 51. One of the responsibilities of a technical committee is, wherever applicable, to make use of basic safety publications in the preparation of its publications. This publication is to be read in conjunction with IEC 60695-2-10. This third edition cancels and replaces the second edition published in 2010 and Amendment 1:2014. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - New terms and definitions with regards to times and durations have been added to Clause 3, with an effect on the application of the test method. |
| 국제분류(ICS)코드 |
13.220.40 : 자재 및 제품의 점화성 및 연소성
29.020 : 전기 공학 일반 |
| 페이지수 | 25 |
| Edition | 3.0 |
이력정보
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | IEC 60695-2-13:2021상세보기 | Fire hazard testing - Part 2-13: Glowing/hot-wire based test methods - Glow-wire ignition temperature (GWIT) test method for materials | 2021-08-24 | 표준 |
| 2 | IEC 60695-2-13:2021 RLV상세보기 | Fire hazard testing - Part 2-13: Glowing/hot-wire based test methods - Glow-wire ignition temperature (GWIT) test method for materials | 2021-08-24 | 표준 |
| 3 | IEC 60695-2-13:2010/AMD1:2014상세보기 | Amendment 1 - Fire hazard testing - Part 2-13: Glowing/hot-wire based test methods - Glow-wire ignition temperature (GWIT) test method for materials | 2014-02-12 | 구판 |
| 4 | IEC 60695-2-13:2010+AMD1:2014 CSV상세보기 | Fire hazard testing - Part 2-13: Glowing/hot-wire based test methods- Glow-wire ignition temperature (GWIT) test method for materials | 2014-02-12 | 구판 |
| 5 | IEC 60695-2-13:2010/COR1:2012상세보기 | Corrigendum 1 - Fire hazard testing - Part 2-13: Glowing/hot-wire based test methods - Glow-wire ignition temperature (GWIT) test method for materials | 2012-02-24 | 구판 |
| 6 | IEC 60695-2-13:2010상세보기 | Fire hazard testing - Part 2-13: Glowing/hot-wire based test methods - Glow-wire ignition temperature (GWIT) test method for materials | 2010-10-11 | 구판 |
| 7 | IEC 60695-2-13:2000상세보기 | Fire hazard testing - Part 2-13: Glowing/hot-wire based test methods - Glow-wire ignitability test method for materials | 2000-10-09 | 구판 |
관련상품
- IEC 60695-1-2:1982 - Fire hazard testing. Part 1: Guidance for the preparation of requirements and test specifications for assessing fire hazard of electrotechnical products. Guidance for electronic components
- IEC 60695-3-1:1982 - Fire hazard testing. Part 3: Examples of fire hazard assessment procedures and interpretation of results. Combustion characteristics and survey of test methods for their determination
- IEC 60695-2-3:1984 - Fire hazard testing. Part 2: Test methods. Bad-connection test with heaters
- IEC 60695-1-3:1986 - Fire hazard testing. Part 1: Guidance for the preparation of requirements and test specifications for assessing fire hazard of electrotechnical products. Guidance for use of preselection procedures
- IEC 60695-2-4/1:1991 - Fire hazard testing - Part 2: Test methods - Section 4/Sheet 1: 1 kW nominal pre-mixed test flame and guidance
다른 사람이 함께 구입한 상품
- IEC 60695-2-10:2021 - Fire hazard testing - Part 2-10: Glowing/hot-wire based test methods - Glow-wire apparatus and common test procedure
- IEC 60695-2-11:2021 - Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end products (GWEPT)
- IEC 60695-2-12:2021 - Fire hazard testing - Part 2-12: Glowing/hot-wire based test methods - Glow-wire flammability index (GWFI) test method for materials
- IEC 60695-11-5:2016 RLV - Fire hazard testing - Part 11-5: Test flames - Needle-flame test method - Apparatus, confirmatory test arrangement and guidance
- IEC 60695-5-1:2021 - Fire hazard testing - Part 5-1: Corrosion damage effects of fire effluent - General guidance
추천 상품
- IEC TS 63134:2020 - Active assisted living (AAL) use cases
- IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification
- KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs)
- KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs)
- KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스
제공형태 닫기
PDF :
직접 파일 다운로드 및 인쇄(마이페이지 확인)보안PDF :
직접 파일 다운로드 및 인쇄(마이페이지 확인)* 단, 파일이동 및 복사 불가, 1회 다운로드 및 인쇄가능PRINT :
인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)BOOK :
인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)ZIP :
압축파일형태로 제공 (PDF, HTML, TXT, XLS 등으로 구성), 직접 파일 다운로드(마이페이지 확인)CD/DVD :
직접 파일 다운로드 및 인쇄(마이페이지 확인)DB :
별도 정보 제공HARDCOPY :
해외 배송 상품, 최대 3주 소요바인더 :
바인더 우편발송, 2~3일 소요온라인구독 :
WEB 접속 후 실시간 열람, 출력(1년간)