한국표준정보망

회원가입 로그인 비회원(주문조회) 장바구니 이용안내

English
메뉴
검색 마이페이지 장바구니0

QUICK

닫기

TOP

해외표준 상세정보

관심표준 등록 : 표준업데이트 시 알림서비스

제공형태 더보기

  • KS

    구판

    판매

    ASTM D3276-15e1

    Standard Guide for Painting Inspectors (Metal Substrates)
    • 발행일 : 2015-07-01
    • 발행기관 : ASTM
    즐겨찾기 장바구니 담기
    닫기

    상품이 장바구니에 담겼습니다.

    장바구니로 이동

    • [영어]PDF 144,300원

    • [영어]PRINT 144,300원

상세정보

분야 06.02 : 페인트-제품 및 적용; 보호용 코팅 . 도관코팅
적용범위

1.1 This guide is intended as an information aid to painting inspectors in carrying out their task efficiently. It includes the key elements of surface preparation, coatings application, and final approval for both field and shop work. The items should be selected that are pertinent to the specification of a particular job.

Note 1: For additional helpful information, refer to the following documents:

Manual of Coating Work for Light-Water Nuclear Power Plant Primary Containment and Other Safety-Related Facilities 2

New Concepts for Coating Protection of Steel Structures3

D16 Terminology for Paint, Related Coatings, Materials, and Applications 4

D4538 Terminology Relating to Protective Coatings and Lining Work for Power Generation Facilities 4

Steel Structures Painting Manual Vol 1 Good Painting Practice 6

Steel Structures Painting Manual Vol 2 Systems and Specifications 6

Manufacturers Specifications and Instructions (made available to the inspector for reference to special requirements for proper application)

Safety Data Sheets (needed to ensure that personnel take necessary precautions in handling hazardous materials). Available from Materials manufacturer.

1.2 Certain industries or owners may require certified inspection personnel. See Guide D4537 for establishing procedures to certify inspectors for coatings work in nuclear facilities.

1.3 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.

1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

1.5 This guide is arranged in the following order:

 

Section

Referenced Documents

2

 ASTM Standards

2.1

 OSHA Standards

2.2

 Steel Structures Painting Council Publications

2.3

 International Standards Organization (ISO)

2.4

 ASTM Adjuncts

2.6

Significance and Use

3

Preparation for Inspection

4

Surface Preparation Methods and Requirements

5

 Surface Preparation

5.1

 Pictorial Standard D2200

5.1.1

 Factors Affecting Coating Performance

5.2

 Cleanliness

5.2.1

 Mill Scale

5.2.2

 Surface Profile

5.2.3

 Sharp Edges

5.2.4

 Cleaning Procedures

5.3

 Chemical Cleaning

5.3.1

 Solvent Vapor Cleaning

5.3.1.1

 Hand Tool Cleaning

5.3.2

 Power Tool Cleaning

5.3.3

 Power Tool Cleaning to Bare Metal

5.3.4

 Commercial Grade Power Tool Cleaning

5.3.4.4

 Blast Cleaning

5.3.5

 Pressurized Water Cleaning

5.3.6

Cleaning and Preparation of Various Surfaces

5.4

 Steel Surfaces

5.4.1

 Galvanized Surfaces

5.4.2

 Aluminum Surfaces

5.4.3

Precautions in Preparing Unpainted and Previously

 

 Painted Surfaces

5.4.4

Inspection of Surfaces Prior to Field Painting

5.5

 New Construction

5.5.1

 Maintenance Repainting

5.5.2

Coating Storage and Handling

6

 Storage of Coating and Thinner

6.1

 Mixing of Coatings

6.2

 Thinning

6.3

 Initial Samples

6.3.1

 Thinning of Coating

6.3.2

 Sampling of Thinned Coating

6.3.3

 Heating of Coating

6.4

Weather Considerations

7

 Drying

7.1

 Low Temperature

7.2

 High Temperature

7.3

 Moisture

7.4

 Wind

7.5

Coating Application

8

 Residual Contaminants

8.1

 Quality Assurance

8.2

 Film Defects

8.2.1

 Brush Application

8.3

 Spray Application

8.4

 Roller Application

8.5

 Miscellaneous Methods

8.6

 Rate of Application

8.7

Additional Considerations

9

 Ventilation

9.1

 Shopcoat Repair

9.2

 Painting Schedule

9.3

 Film Integrity

9.4

 Recoat Time

9.5

 Coating System Failure

9.6

Inspection Equipment

10

 General

10.1

 Surface Profile Gages

10.1.1

 Adhesion of Existing Coating

10.1.2

 Portable Pull-Off Adhesion Testers

10.1.3

 Field Inspection Equipment

10.2

 Drying and Curing Times

10.2.1

 Thermometers

10.2.1.1

 Relative Humidity and Dew Point

10.2.1.2

 Wet-Film Thickness Gages

10.2.2

 Interchemical Gage

10.2.2.1

 Notched Gage

10.2.2.2

 Dry-Film Thickness Gages

10.2.3

 Nondestructive Film Thickness Gages

10.2.3.1

 Magnetic-Type Gages

10.2.3.2

 Current-Type Gages

10.2.3.3

 Destructive Thickness Gage

10.2.3.4

 Holiday Detectors

10.2.4

Comparison of Surface Preparation

 

 Specifications

Table 1

Comparison of Water Jetting Standards

Table 2

Inspection Checklist

Appendix X1
국제분류(ICS)코드 87.020 : 페인트 도장 공정
페이지수 14
Edition 15e1

이력정보

No. 표준번호 표준명 발행일 상태
1 ASTM D3276-21상세보기 Standard Guide for Painting Inspectors (Metal Substrates) 2021-11-01 표준
2 ASTM D3276-21 REDLINE상세보기 Standard Guide for Painting Inspectors (Metal Substrates) 2021-11-01 표준
3 ASTM D3276-15e1상세보기 Standard Guide for Painting Inspectors (Metal Substrates) 2015-07-01 구판
4 ASTM D3276-15상세보기 Standard Guide for Painting Inspectors (Metal Substrates) 2015-07-01 구판
5 ASTM D3276-07상세보기 Standard Guide for Painting Inspectors (Metal Substrates) 2007-02-01 구판
6 ASTM D3276-05상세보기 Standard Guide for Painting Inspectors (Metal Substrates) 2005-12-01 구판
7 ASTM D3276-00상세보기 Standard Guide for Painting Inspectors (Metal Substrates) 2000-06-10 구판

관련상품

  • 관련상품이 존재하지 않습니다.

다른 사람이 함께 구입한 상품

추천 상품

제공형태 닫기

  • PDF :

    직접 파일 다운로드 및 인쇄(마이페이지 확인)

  • 보안PDF :

    직접 파일 다운로드 및 인쇄(마이페이지 확인)* 단, 파일이동 및 복사 불가, 1회 다운로드 및 인쇄가능

  • PRINT :

    인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)

  • BOOK :

    인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)

  • ZIP :

    압축파일형태로 제공 (PDF, HTML, TXT, XLS 등으로 구성), 직접 파일 다운로드(마이페이지 확인)

  • CD/DVD :

    직접 파일 다운로드 및 인쇄(마이페이지 확인)

  • DB :

    별도 정보 제공

  • HARDCOPY :

    해외 배송 상품, 최대 3주 소요

  • 바인더 :

    바인더 우편발송, 2~3일 소요

  • 온라인구독 :

    WEB 접속 후 실시간 열람, 출력(1년간)