QUICK

TOP

해외표준 상세정보

관심표준 등록 : 표준업데이트 시 알림서비스

제공형태 더보기
  • KS

    구판

    판매

    ASTM A193/A193M-20

    Standard Specification for Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications
    • 발행일 : 2020-05-15
    • 발행기관 : ASTM
    즐겨찾기 장바구니 담기
    닫기

    상품이 장바구니에 담겼습니다.

    장바구니로 이동
    • [영어]PDF 145,400원

    • [영어]PRINT 145,400원

상세정보

분야 01.01 : 철강-배관, 튜브, 관이음쇠
적용범위

1.1 This specification2 covers alloy and stainless steel bolting materials and bolting components for pressure vessels, valves, flanges, and fittings for high temperature or high pressure service, or other special purpose applications. See Specification A962/A962M for the definition of bolting. Bars and wire shall be hot-wrought and may be further processed by centerless grinding or by cold drawing. Austenitic stainless steel may be carbide solution treated or carbide solution treated and strain-hardened. When strain hardened austenitic stainless steel is ordered, the purchaser should take special care to ensure that Appendix X1 is thoroughly understood.

1.2 Several grades are covered, including ferritic steels and austenitic stainless steels designated B5, B8, and so forth. Selection will depend upon design, service conditions, mechanical properties, and high temperature characteristics.

1.3 The following referenced general requirements are indispensable for application of this specification: Specification A962/A962M.

Note 1: The committee formulating this specification has included several steel types that have been rather extensively used for the present purpose. Other compositions will be considered for inclusion by the committee from time to time as the need becomes apparent.

Note 2: For grades of alloy-steel bolting suitable for use at the lower range of high temperature applications, reference should be made to Specification A354.

Note 3: For grades of alloy-steel bolting suitable for use in low temperature applications, reference should be made to Specification A320/A320M.

1.4 Nuts for use with bolting are covered in Section 13.

1.5 Supplementary Requirements are provided for use at the option of the purchaser. The supplementary requirements shall apply only when specified in the purchase order or contract.

1.6 This specification is expressed in both inch-pound units and in SI units; however, unless the purchase order or contract specifies the applicable M specification designation (SI units), the inch-pound units shall apply.

1.7 The values stated in either SI units or inch-pound units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.

1.8 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

국제분류(ICS)코드 77.080.20 : 일반 강철
21.060.01 : 조임쇠 일반
페이지수 14
Edition 20

이력정보

No. 표준번호 표준명 발행일 상태
1 ASTM A193/A193M-24a상세보기 Standard Specification for Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications 2024-10-15 표준
2 ASTM A193/A193M-24a REDLINE상세보기 Standard Specification for Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications 2024-10-15 표준
3 ASTM A193/A193M-24상세보기 Standard Specification for Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications 2024-03-01 구판
4 ASTM A193/A193M-24 REDLINE상세보기 Standard Specification for Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications 2024-03-01 구판
5 ASTM A193/A193M-23 REDLINE상세보기 Standard Specification for Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications 2023-03-01 구판
6 ASTM A193/A193M-23상세보기 Standard Specification for Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications 2023-03-01 구판
7 ASTM A193/A193M-22a REDLINE상세보기 Standard Specification for Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications 2022-11-01 구판
8 ASTM A193/A193M-22a상세보기 Standard Specification for Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications 2022-11-01 구판
9 ASTM A193/A193M-22상세보기 Standard Specification for Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications 2022-09-01 구판
10 ASTM A193/A193M-22 REDLINE상세보기 Standard Specification for Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications 2022-09-01 구판
11 ASTM A193/A193M-20 REDLINE상세보기 Standard Specification for Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications 2020-05-15 구판
12 ASTM A193/A193M-20상세보기 Standard Specification for Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications 2020-05-15 구판
13 ASTM A193/A193M-19 REDLINE상세보기 Standard Specification for Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications 2019-11-01 구판
14 ASTM A193/A193M-19상세보기 Standard Specification for Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications 2019-11-01 구판
15 ASTM A193/A193M-17상세보기 Standard Specification for Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications 2017-11-15 구판
16 ASTM A193/A193M-17 REDLINE상세보기 Standard Specification for Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications 2017-11-15 구판
17 ASTM A193/A193M-16상세보기 Standard Specification for Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications 2016-03-01 구판
18 ASTM A193/A193M-15a상세보기 Standard Specification for Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications 2015-11-01 구판
19 ASTM A193/A193M-15상세보기 Standard Specification for Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications 2015-06-01 구판
20 ASTM A193/A193M-14a상세보기 Standard Specification for Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications 2014-11-15 구판
21 ASTM A193/A193M-14상세보기 Standard Specification for Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications 2014-06-01 구판
22 ASTM A193/A193M-12b상세보기 Standard Specification for Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications 2012-08-08 구판
23 ASTM A193/A193M-12상세보기 Standard Specification for Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications 2012-03-01 구판
24 ASTM A193/A193M-11a상세보기 Standard Specification for Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications 2011-11-01 구판
25 ASTM A193/A193M-11상세보기 Standard Specification for Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications 2011-05-01 구판
26 ASTM A193/A193M-10a상세보기 Standard Specification for Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications 2010-05-15 구판
27 ASTM A193/A193M-10상세보기 Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for High Temperature or High Pressure Service and Other Special Purpose Applications 2010-05-01 구판
28 ASTM A193/A193M-09상세보기 Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for High Temperature or High Pressure Service and Other Special Purpose Applications 2009-06-01 구판
29 ASTM A193/A193M-08b상세보기 Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for High Temperature or High Pressure Service and Other Special Purpose Applications 2008-08-01 구판
30 ASTM A193/A193M-08a상세보기 Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for High Temperature or High Pressure Service and Other Special Purpose Applications 2008-05-01 구판
31 ASTM A193/A193M-08상세보기 Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for High Temperature or High Pressure Service and Other Special Purpose Applications 2008-04-01 구판
32 ASTM A193/A193M-07상세보기 Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for High Temperature or High Pressure Service and Other Special Purpose Applications 2007-03-01 구판
33 ASTM A193/A193M-06a상세보기 Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for High Temperature or High Pressure Service and Other Special Purpose Applications 2006-03-01 구판
34 ASTM A193/A193M-06상세보기 Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for High Temperature or High Pressure Service and Other Special Purpose Applications 2006-01-15 구판
35 ASTM A193/A193M-05상세보기 Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for High-Temperature Service 2005-06-01 구판
36 ASTM A193/A193M-04c상세보기 Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for High-Temperature Service 2004-10-01 구판
37 ASTM A193/A193M-04b상세보기 Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for High-Temperature Service 2004-07-01 구판
38 ASTM A193/A193M-04a상세보기 Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for High-Temperature Service 2004-05-11 구판
39 ASTM A193/A193M-03상세보기 Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for High-Temperature Service 2003-05-10 구판
40 ASTM A193/A193M-01b상세보기 Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for High-Temperature Service 2001-10-10 구판
41 ASTM A193/A193M-00a상세보기 Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for High-Temperature Service 2001-10-10 구판
42 ASTM A193/A193M-00b상세보기 Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for High-Temperature Service 2001-10-10 구판
43 ASTM A193/A193M-01상세보기 Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for High-Temperature Service 2001-10-10 구판
44 ASTM A193/A193M-01a상세보기 Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for High-Temperature Service 2001-10-10 구판
45 ASTM A193/A193M-98a상세보기 Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for High-Temperature Service 구판

제공형태 닫기

  • PDF :

    직접 파일 다운로드 및 인쇄(마이페이지 확인)
  • 보안PDF :

    직접 파일 다운로드 및 인쇄(마이페이지 확인)* 단, 파일이동 및 복사 불가, 1회 다운로드 및 인쇄가능
  • PRINT :

    인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
  • BOOK :

    인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
  • ZIP :

    압축파일형태로 제공 (PDF, HTML, TXT, XLS 등으로 구성), 직접 파일 다운로드(마이페이지 확인)
  • CD/DVD :

    직접 파일 다운로드 및 인쇄(마이페이지 확인)
  • DB :

    별도 정보 제공
  • HARDCOPY :

    해외 배송 상품, 최대 3주 소요
  • 바인더 :

    바인더 우편발송, 2~3일 소요
  • 온라인구독 :

    WEB 접속 후 실시간 열람, 출력(1년간)