관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
분야 | 01.03 : 철강-강판, 강대 및 강선 |
---|---|
적용범위 | 1.1 This specification2 covers chromium, chromium-nickel, and chromium-manganese-nickel stainless steel plate, sheet, and strip for pressure vessels and for general applications including architectural, building, construction, and aesthetic applications. 1.2 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. 1.3 This specification is expressed in both inch-pound and SI units. However, unless the order specifies the applicable “M” specification designation (SI units), the material shall be furnished in inch-pound units. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. |
국제분류(ICS)코드 | 77.140.30 : 압력용기용 강 |
페이지수 | 12 |
Edition | 20 |
No. | 표준번호 | 표준명 | 발행일 | 상태 |
---|---|---|---|---|
1 | ASTM A240/A240M-24 | Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications | 2024-05-01 | 표준 |
2 | ASTM A240/A240M-24 REDLINE | Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications | 2024-05-01 | 표준 |
3 | ASTM A240/A240M-23a | Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications | 2023-11-01 | 구판 |
4 | ASTM A240/A240M-23a REDLINE | Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications | 2023-11-01 | 구판 |
5 | ASTM A240/A240M-23 REDLINE | Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications | 2023-03-01 | 구판 |
6 | ASTM A240/A240M-23 | Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications | 2023-03-01 | 구판 |
7 | ASTM A240/A240M-22b REDLINE | Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications | 2022-11-01 | 구판 |
8 | ASTM A240/A240M-22b | Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications | 2022-11-01 | 구판 |
9 | ASTM A240/A240M-22a | Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications | 2022-09-01 | 구판 |
10 | ASTM A240/A240M-22a REDLINE | Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications | 2022-09-01 | 구판 |
11 | ASTM A240/A240M-22 REDLINE | Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications | 2022-05-01 | 구판 |
12 | ASTM A240/A240M-22 | Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications | 2022-05-01 | 구판 |
13 | ASTM A240/A240M-20a | Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications | 2020-11-15 | 구판 |
14 | ASTM A240/A240M-20a REDLINE | Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications | 2020-11-15 | 구판 |
15 | ASTM A240/A240M-20 REDLINE | Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications | 2020-07-15 | 구판 |
16 | ASTM A240/A240M-20 | Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications | 2020-07-15 | 구판 |
17 | ASTM A240/A240M-19 | Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications | 2019-12-01 | 구판 |
18 | ASTM A240/A240M-19 REDLINE | Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications | 2019-12-01 | 구판 |
19 | ASTM A240/A240M-18 | Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications | 2018-11-01 | 구판 |
20 | ASTM A240/A240M-18 REDLINE | Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications | 2018-11-01 | 구판 |
21 | ASTM A240/A240M-17 | Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications | 2017-11-01 | 구판 |
22 | ASTM A240/A240M-16a | Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications | 2016-12-01 | 구판 |
23 | ASTM A240/A240M-16 | Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications | 2016-05-01 | 구판 |
24 | ASTM A240/A240M-15b | Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications | 2015-11-01 | 구판 |
25 | ASTM A240/A240M-15a | Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications | 2015-03-01 | 구판 |
26 | ASTM A240/A240M-15 | Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications | 2015-01-01 | 구판 |
27 | ASTM A240/A240M-14 | Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications | 2014-05-01 | 구판 |
28 | ASTM A240/A240M-13c | Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications | 2013-11-01 | 구판 |
29 | ASTM A240/A240M-13b | Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications | 2013-10-01 | 구판 |
30 | ASTM A240/A240M-13a | Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications | 2013-05-01 | 구판 |
31 | ASTM A240/A240M-13 | Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications | 2013-04-01 | 구판 |
32 | ASTM A240/A240M-12a | Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications | 2012-11-01 | 구판 |
33 | ASTM A240/A240M-12 | Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications | 2012-04-01 | 구판 |
34 | ASTM A240/A240M-11b | Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications | 2011-12-01 | 구판 |
35 | ASTM A240/A240M-11a | Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications | 2011-04-01 | 구판 |
36 | ASTM A240/A240M-11 | Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications | 2011-02-15 | 구판 |
37 | ASTM A240/A240M-10b | Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications | 2010-11-01 | 구판 |
38 | ASTM A240/A240M-10a | Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications | 2010-07-01 | 구판 |
39 | ASTM A240/A240M-10 | Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications | 2010-04-01 | 구판 |
40 | ASTM A240/A240M-09c | Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications | 2009-11-01 | 구판 |
41 | ASTM A240/A240M-09b | Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications | 2009-10-01 | 구판 |
42 | ASTM A240/A240M-09a | Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications | 2009-04-01 | 구판 |
43 | ASTM A240/A240M-09 | Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications | 2009-03-15 | 구판 |
44 | ASTM A240/A240M-08a | Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications | 2008-10-15 | 구판 |
45 | ASTM A240/A240M-08 | Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications | 2008-05-15 | 구판 |
46 | ASTM A240/A240M-07 | Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications | 2007-04-01 | 구판 |
47 | ASTM A240/A240M-07e1 | Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications | 2007-04-01 | 구판 |
48 | ASTM A240/A240M-06b | Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications | 2006-07-01 | 구판 |
49 | ASTM A240/A240M-06c | Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications | 2006-07-01 | 구판 |
50 | ASTM A240/A240M-06a | Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications | 2006-06-15 | 구판 |
51 | ASTM A240/A240M-06 | Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications | 2006-03-15 | 구판 |
52 | ASTM A240/A240M-05a | Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications | 2005-09-01 | 구판 |
53 | ASTM A240/A240M-05 | Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications | 2005-03-01 | 구판 |
54 | ASTM A240/A240M-04a | Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications | 2004-03-01 | 구판 |
55 | ASTM A240/A240M-04ae1 | Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications | 2004-03-01 | 구판 |
56 | ASTM A240/A240M-04 | Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications | 2004-01-01 | 구판 |
57 | ASTM A240/A240M-03c | Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications | 2003-09-10 | 구판 |
58 | ASTM A240/A240M-03b | Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications | 2003-05-10 | 구판 |
59 | ASTM A240/A240M-03a | Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications | 2003-04-10 | 구판 |
60 | ASTM A240/A240M-03 | Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications | 2003-02-10 | 구판 |
61 | ASTM A240/A240M-02a | Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications | 2002-10-10 | 구판 |
62 | ASTM A240/A240M-02 | Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications | 2001-03-10 | 구판 |
63 | ASTM A240/A240M-99b | Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications | 2001-03-10 | 구판 |
64 | ASTM A240/A240M-00a | Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications | 2001-03-10 | 구판 |
65 | ASTM A240/A240M-01 | Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications | 2001-03-10 | 구판 |
관련상품이 존재하지 않습니다.
ASTM A370-20 - Standard Test Methods and Definitions for Mechanical Testing of Steel Products 상세보기
ASTM G101-04(2015) - Standard Guide for Estimating the Atmospheric Corrosion Resistance of Low-Alloy Steels 상세보기
ASTM F50-12(2015) - Standard Practice for Continuous Sizing and Counting of Airborne Particles in Dust-Controlled Areas and Clean Rooms Using Instruments Capable of Detecting Single Sub-Micrometre and Larger Particles 상세보기
IEEE 386-2016 - IEEE Standard for Separable Insulated Connector Systems for Power Distribution Systems Rated 2.5 kV through 35 kV 상세보기
DIN 933:1987-09 - M 1,6 to M 52 hexagon head screws threaded up to the head; product grades A and B 상세보기
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기