관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
언어 | 제공형태 | 판매가격 | 선택 |
---|---|---|---|
영어 |
보안PDF |
282,100원 |
|
분야 | |
---|---|
적용범위 | Preface This is the third edition of CSA B415.1, Performance testing of solid-fuel-burning heating appliances. It supersedes the previous editions, published in 2000 under the same title, and published in 1992 under the title Performance Testing of Solid-Fuel-Burning Stoves, Inserts, and Low-Burn-Rate Factory-Built Appliances. Scope 1.1 This Standard specifies requirements for performance testing of solid-fuel-burning heating appliances, including maximum emission rates. 1.2 This Standard specifies a method for determining (a) heat outputs (b) appliance efficiencies (c) emission levels and composition and (d) flue gas flow rates. 1.3 This Standard applies to (a) manually and automatically fuelled stoves and fireplace inserts (b) factory-built fireplaces with a minimum burn rate less than 5 kg/h (11 lb/h), as determined in accordance with Clause 7 and (c) furnaces and hydronic heaters designed to have the useful heat produced by the appliance conveyed to areas remote from the appliance by ducting or plumbing. Note: Typically, units tested under this Standard will have outputs less than 150 kW (500 000 Btu/h). For the purposes of this Standard, solid-fuel-burning appliances include manually and automatically fuelled systems (including add-ons and combinations). 1.4 This Standard covers appliances that burn biomass fuels such as (a) cordwood (b) wood chips (c) sawdust (d) firelogs (e) wood, paper, and other biomass pellets and briquettes and (f) kernel corn and other grains.? This Standard does not cover coal-fired appliances. 1.5 This Standard does not apply to (a) site-built masonry fireplaces (b) site-built masonry heaters or (c) factory-built fireplaces with a minimum burn rate greater than or equal to 5 kg/h (11 lb/h). 1.6 The values given in SI units are the units of record for the purposes of this Standard. The values given in parentheses are for information and comparison only. 1.7 In CSA standards, "shall" is used to express a requirement, i.e., a provision that the user is obliged to satisfy in order to comply with the standard; "should" is used to express a recommendation or that which is advised but not required; and "may" is used to express an option or that which is permissible within the limits of the standard. Notes accompanying clauses do not include requirements or alternative requirements; the purpose of a note accompanying a clause is to separate from the text explanatory or informative material. Notes to tables and figures are considered part of the table or figure and may be written as requirements. Annexes are designated normative (mandatory) or informative (nonmandatory) to define their application. |
국제분류(ICS)코드 | |
페이지수 | 89 |
Edition |
No. | 표준번호 | 표준명 | 발행일 | 상태 |
---|---|---|---|---|
1 | CSA B415.1:22 | Performance testing of solid-biofuel-burning heating appliances | 2022-01-01 | 표준 |
관련상품이 존재하지 않습니다.
CSA C22.2 NO. 232:17 (R2021) - Optical fiber cables 상세보기
C22.1-18 - Canadian Electrical Code, Part I (24th Edition), Safety Standard for Electrical Installations 상세보기
CSA C653-18 - Photometric performance of roadway and street lighting luminaires 상세보기
CSA C22.2 NO. 291:19 - Bare and covered ferrules (Binational standard with UL 486F) 상세보기
CSA C22.2 NO. 62368-1:19 - Audio/video, information and communication technology equipment - Part 1: Safety requirements (Binational standard with UL 62368-1) 상세보기
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기